Renesas Electronics 85104AGILF Clock Buffer, 20-Pin 4 TSSOP

Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
216-6209
Fabrikantnummer:
85104AGILF
Fabrikant:
Renesas Electronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Renesas Electronics

Product Type

Clock Buffer

Mount Type

Surface

Package Type

TSSOP

Minimum Supply Voltage

3V

Pin Count

20

Maximum Supply Voltage

3.3V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

1mm

Width

4.4 mm

Length

6.5mm

Series

85104A

Standards/Approvals

No

Number of Outputs

4

Automotive Standard

No

Maximum Output Frequency

700MHz

The Renesas Electronics 85104I is a low skew, high performance 1-to-4 Differential/LVCMOS-to-0.7V HCSL Fanout Buffer. The 85104I has two selectable clock inputs. The CLK0, nCLK0 pair can accept most standard differential input levels. The single-ended CLK1 can accept LVCMOS or LVTTL input levels. The clock enable is internally synchronized to eliminate runt clock pulses on the outputs during asynchronous assertion/deassertion of the clock enable pin.

Four 0.7V differential HCSL outputs

Selectable differential CLK0, nCLK0 or LVCMOS inputs

CLK0, nCLK0 pair can accept the following differential

input levels: LVPECL, LVDS, LVHSTL, HCSL

CLK1 can accept the following input levels:

LVCMOS or LVTTL

Maximum output frequency: 500MHz

Translates any single-ended input signal to 3.3V

HCSL levels with resistor bias on nCLK input

Output skew: 100ps (maximum)

Part-to-part skew: 600ps (maximum)

Propagation delay: 3.2ns (maximum)

Additive phase jitter, RMS: 0.22ps (typical)

Gerelateerde Links