Infineon OptiMOS P Type P-Channel MOSFET, 1.5 A, 30 V Enhancement, 3-Pin SOT-23

RS-stocknr.:: 165-8258
Fabrikantnummer:: BSS314PEH6327XTSA1
Fabrikant:: Infineon

Infineon OptiMOS P Type P-Channel MOSFET, 1.5 A, 30 V Enhancement, 3-Pin SOT-23

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 rol van 3000 eenheden)*

€ 228,00

(excl. BTW)

€ 276,00

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

3.000 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per rol*
3000 - 3000	€ 0,076	€ 228,00
6000 - 12000	€ 0,072	€ 216,00
15000 +	€ 0,067	€ 201,00

*prijsindicatie

RS-stocknr.:: 165-8258
Fabrikantnummer:: BSS314PEH6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Channel Type	Type P
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	1.5A
	Maximum Drain Source Voltage Vds	30V
	Series	OptiMOS P
	Package Type	SOT-23
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	230mΩ
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	2.9nC
	Forward Voltage Vf	-1.1V
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	500mW
	Maximum Operating Temperature	150°C
	Height	1.3mm
	Standards/Approvals	No
	Length	2.9mm
	Automotive Standard	AEC-Q101

	Alles selecteren
	Merk Infineon
	Channel Type Type P
	Product Type MOSFET
	Maximum Continuous Drain Current Id 1.5A
	Maximum Drain Source Voltage Vds 30V
	Series OptiMOS P
	Package Type SOT-23
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 230mΩ
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 2.9nC
	Forward Voltage Vf -1.1V
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 500mW
	Maximum Operating Temperature 150°C
	Height 1.3mm
	Standards/Approvals No
	Length 2.9mm
	Automotive Standard AEC-Q101

Land van herkomst:: CN

Infineon OptiMOS P Series MOSFET, 30V Maximum Drain Source Voltage, 1.5A Maximum Continuous Drain Current - BSS314PEH6327XTSA1

This p-channel MOSFET serves as a compact surface-mount switching device for low-voltage power control in automotive and industrial electronics. Designed for enhancement-mode operation, it offers controlled conduction for power-path and load-switching tasks across a wide temperature range, making it suitable for demanding thermal environments.

Features and Benefits:

• 30V drain capability enables low-voltage system switching
• 230mΩ Rds(on) delivers efficient conduction for small loads
• 1.5A continuous drain current supports moderate current paths
• 2.9nC typical gate charge reduces switching energy losses
• 20V maximum gate-source rating allows flexible gate drive margins
• Automotive AEC‑Q101 qualification suits vehicle‑grade applications

Applications

• Suitable for battery management and protection circuits
• Ideal for load switching in automotive control modules
• Used with power rails in handheld and portable electronics
• Can be used for small-signal power switching in sensor nodes
• Suitable for surface-mount designs where board space is limited

What thermal extremes can it tolerate during operation?

It is specified to operate from -55°C up to 150°C, allowing use in environments with wide temperature variation.

How does the package influence board-level integration?

The SOT-23 surface-mount format permits compact placement and automated assembly on densely populated boards.

What power-handling constraints should designers consider?

The device dissipates up to 500mW, so adequate PCB copper and thermal layout are required to manage junction temperature under continuous load.

Which electrical limit governs gate drive selection?

Drive voltages must remain within ±20V relative to the source to avoid gate overstress and ensure reliable switching.