Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- RS-stocknr.:
- 170-7983
- Fabrikantnummer:
- 74HC574D,653
- Fabrikant:
- Nexperia
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 170-7983
- Fabrikantnummer:
- 74HC574D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 2V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Flip-Flop Type | D Flip-Flop | |
| Trigger Type | Positive Edge | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Minimum Operating Temperature | -40°C | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Height | 2.45mm | |
| Length | 13mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 2V | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Flip-Flop Type D Flip-Flop | ||
Trigger Type Positive Edge | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Minimum Operating Temperature -40°C | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Height 2.45mm | ||
Length 13mm | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Gerelateerde Links
- Nexperia 74HC74D,653 2 Flip Flop IC 74HC, D Type, 14-Pin SO
- Nexperia 74HCT574D,653 8 Flip Flop IC 74HCT, 3 State, 20-Pin SO
- Nexperia HEF4013BT,653 2 Flip Flop IC HEF, Buffer, 14-Pin SO
- Nexperia 74HCT273D,653 8 Flip Flop IC 74HCT, D Type, 20-Pin SO
- Nexperia 74HCT74D,653 2 Flip Flop IC 74HCT, D Type, 14-Pin SO
- Nexperia 74HC574PW,118 1 Flip Flop IC 74HC, 3 State, 20-Pin TSSOP
- Nexperia 74HC123D,653 2 Monostable Multivibrator 74HC, 16-Pin SO
- Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC