Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC
- RS-stocknr.:
- 124-2263
- Fabrikantnummer:
- 74HC574D,652
- Fabrikant:
- Nexperia
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 124-2263
- Fabrikantnummer:
- 74HC574D,652
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Octal D Type Flip Flop | |
| Logic Family | HC | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SOIC | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Flip-Flop Type | Type D | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Length | 13mm | |
| Series | 74HC | |
| Standards/Approvals | JEDEC No. 7A | |
| Height | 2.45mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Octal D Type Flip Flop | ||
Logic Family HC | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SOIC | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Flip-Flop Type Type D | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Length 13mm | ||
Series 74HC | ||
Standards/Approvals JEDEC No. 7A | ||
Height 2.45mm | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Gerelateerde Links
- Nexperia 74HC173D,652 4 Flip Flop IC HC, 3 State, 16-Pin SOIC
- Nexperia 74HC123D,652 2 Flip Flop IC HC, 16-Pin SOIC
- Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- Nexperia 74HC175D,652 4 Flip Flop IC HC, Standard, 16-Pin SOIC
- Nexperia 74HC74D,652 2 Flip Flop IC HC, Dual D Type, 14-Pin SOIC
- Nexperia 74HCT374D,652 Flip Flop IC
- Nexperia 74HC73D,652 Flip Flop IC
- Nexperia 74HC173D,652 Quad D Type Flip Flop IC, 3-State, 16-Pin SOIC