Nexperia 74HCT574D,653 8 Flip Flop IC 74HCT, 3 State, 20-Pin SO
- RS-stocknr.:
- 170-8020
- Fabrikantnummer:
- 74HCT574D,653
- Fabrikant:
- Nexperia
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 170-8020
- Fabrikantnummer:
- 74HCT574D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HCT | |
| Input Type | TTL | |
| Output Type | 3 State | |
| Clock Frequency | 20MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SO | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 20 | |
| Flip-Flop Type | D Flip-Flop | |
| Maximum Propagation Delay Time @ CL | 50ns | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Length | 13mm | |
| Height | 2.45mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HCT | ||
Input Type TTL | ||
Output Type 3 State | ||
Clock Frequency 20MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Package Type SO | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 20 | ||
Flip-Flop Type D Flip-Flop | ||
Maximum Propagation Delay Time @ CL 50ns | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Length 13mm | ||
Height 2.45mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Gerelateerde Links
- Nexperia 74HCT273D,653 8 Flip Flop IC 74HCT, D Type, 20-Pin SO
- Nexperia 74HCT74D,653 2 Flip Flop IC 74HCT, D Type, 14-Pin SO
- Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- Nexperia HEF4013BT,653 2 Flip Flop IC HEF, Buffer, 14-Pin SO
- Nexperia 74HC74D,653 2 Flip Flop IC 74HC, D Type, 14-Pin SO
- Nexperia 74HCT245D,653 18 Bus Transceiver 74HCT, 3 State, 20-Pin SO
- Nexperia 74HC273D,653 8-Bit Latch, Addressable, D Type Flip-Flop, 20-Pin SO
- Nexperia 74HC73D-Q100J Flip Flop IC HC, CMOS, 14-Pin SO-14