Splice Connectors | Butt Connectors | RS
Login / Registreer om gebruik te maken van uw voordelen
Onlangs gezocht

    Splice Connectors

    A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.

    Types of splice connectors:

    • Crimp Butt Splice Terminal
    • Crimp Closed End Terminal
    • Crimp Barrel Foil Terminal
    • Push Wire Terminal

    Frequently asked Questions

    What are Crimp Butt Splice Terminals

    Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.

    How Do Crimp Butt Splice Terminals Work ?

    Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.

    What are Crimp Closed-End Connectors used for?

    Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.

    Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.

    735 Producten voor Splice Connectors

    TE Connectivity
    Open Barrel
    -
    20 → 17 AWG
    -
    7mm
    3.2mm
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Copper Zinc
    Pre-Tin
    0.33mm
    TE Connectivity
    Parallel
    -
    22 → 16 AWG
    -
    19.3mm
    3.56mm
    -
    Insulated
    -
    -
    Red
    -
    -
    -
    PLASTI-GRIP
    -
    -
    -
    Copper
    Tin
    -
    RS PRO
    Butt Splice
    0.5mm²
    0.5 → 1.5 mm², 22 → 16 AWG
    1.5mm²
    15mm
    3.3mm
    22AWG
    Uninsulated
    16AWG
    2
    Silver
    -
    -
    -
    -
    -
    -
    -
    Copper
    Tin
    -
    RS PRO
    T-Tap
    0.5mm²
    18 → 22 AWG
    0.75mm²
    37mm
    9.8mm
    22AWG
    Insulated
    18AWG
    -
    Red
    -
    Nylon
    -
    -
    -
    -
    -
    Phosphor Bronze
    Tin
    -
    TE Connectivity
    Open Barrel
    -
    20 → 17 AWG
    -
    7mm
    -
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Brass
    Tin
    -
    TE Connectivity
    -
    -
    22 → 12 AWG
    -
    31.75mm
    11.56mm
    -
    Insulated
    -
    -
    Translucent
    -
    PVC
    -
    329251
    -
    -
    -
    Copper
    Tin
    -
    HellermannTyton
    -
    -
    22 → 12 AWG
    -
    11mm
    -
    22AWG
    -
    12AWG
    -
    -
    -
    -
    -
    HelaCon
    -
    -
    -
    Brass
    Tin
    -
    TE Connectivity
    -
    -
    -
    -
    27.94mm
    2.46 → 2.59 (Inner Diameter) mm, 3.73 → 3.89 (Outer Diameter) mm
    -
    Insulated
    -
    -
    -
    -
    PVDF
    -
    D-436
    -
    -
    -
    Copper Alloy
    Tin
    -
    TE Connectivity
    Spare Wire Cap
    -
    12 → 10 AWG
    -
    12.14mm
    -
    -
    Insulated
    -
    -
    Yellow
    -
    -
    -
    PIDG
    -
    -
    -
    Copper
    Tin
    -
    Molex
    Quick Splice
    -
    10 AWG, 12 AWG
    -
    25.68mm
    -
    12AWG
    Insulated
    10AWG
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TE Connectivity
    Pigtail
    -
    18.5 AWG
    -
    2.6mm
    -
    24AWG
    Uninsulated
    18.5AWG
    -
    -
    -
    -
    -
    SPLICE
    -
    -
    -
    -
    -
    0.41mm
    TE Connectivity
    Butt
    -
    22 → 18 AWG
    -
    36mm
    3.7mm
    -
    Insulated
    -
    -
    Red
    -
    -
    -
    DuraSeal
    -
    -
    -
    Copper
    Tin
    -
    TE Connectivity
    Butt
    -
    12 → 10 AWG
    -
    14.35mm
    5.74mm
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    STRATO-THERM
    -
    -
    -
    Copper
    Nickel
    0.99mm
    RS PRO
    Butt Splice
    -
    22 → 26 AWG
    -
    12.5mm
    8.8mm
    26AWG
    Insulated
    22AWG
    2
    White, Yellow
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TE Connectivity
    Butt
    -
    4 AWG
    -
    28.96mm
    11.76mm
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    Solistrand
    -
    -
    -
    Copper
    Tin
    1.85mm
    JST
    Butt
    -
    16 → 14 AWG
    -
    22.7mm
    4.5mm
    -
    Insulated
    -
    -
    Blue
    -
    Nylon, Vinyl
    -
    FVC
    -
    -
    -
    -
    -
    -
    WAGO
    Wire Splice
    -
    Splice Connector
    -
    295mm
    -
    -
    Insulated
    -
    -
    Clear
    -
    -
    -
    887
    -
    -
    -
    -
    -
    -
    Klauke
    Butt
    -
    -
    50mm²
    50mm
    -
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    Cu
    -
    -
    -
    Copper
    Tin
    -
    Klauke
    Butt
    -
    -
    10mm²
    30mm
    -
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    Cu
    -
    -
    -
    Copper
    Tin
    -
    TE Connectivity
    Parallel
    -
    12 → 10 AWG
    -
    8.71mm
    5.74mm
    -
    Uninsulated
    -
    -
    -
    -
    -
    -
    SOLISTRAND
    -
    -
    -
    Copper
    Tin
    0.99mm
    Resultaten per pagina