SICK, BEF Series Mounting Bracket Bracket 46 mm for Use with SensingCam SEC100, UNSPSC, ETIM, eClass Standard
- RS-stocknr.:
- 647-970
- Fabrikantnummer:
- BEF-SEC100
- Fabrikant:
- SICK
Subtotaal (1 eenheid)*
€ 16,61
(excl. BTW)
€ 20,10
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 16,61 |
*prijsindicatie
- RS-stocknr.:
- 647-970
- Fabrikantnummer:
- BEF-SEC100
- Fabrikant:
- SICK
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SICK | |
| Accessory Type | Mounting Bracket | |
| Product Type | Sensor Accessory | |
| Sub Type | Bracket | |
| For Use With | SensingCam SEC100 | |
| Series | BEF | |
| Width | 61.7 mm | |
| Diameter | 46 mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | UNSPSC, ETIM, eClass | |
| Alles selecteren | ||
|---|---|---|
Merk SICK | ||
Accessory Type Mounting Bracket | ||
Product Type Sensor Accessory | ||
Sub Type Bracket | ||
For Use With SensingCam SEC100 | ||
Series BEF | ||
Width 61.7 mm | ||
Diameter 46 mm | ||
Hazardous Area Certification No | ||
Standards/Approvals UNSPSC, ETIM, eClass | ||
- Land van herkomst:
- MY
Overview
The mounting bracket kit by SICK is engineered for the sensingCam SEC100 camera and includes a U‑shaped galvanised steel bracket, two M4 screws with washers, and two slidable mounting blocks, enabling flexible adjustment and secure assembly.
This sturdy set ensures reliable, adaptable installation in various industrial environments.
At a glance
Made of steel and zinc coated materal
Suitable for sensingCam SEC100
Gerelateerde Links
- SICK, BEF Series Mounting Bracket Bracket for Use with SensingCam SEC100, eClass, ETIM, UNSPSC Standard
- SICK, Power Supply Unit Series Plug Power Supply Unit for Use with Charging Station, UNSPSC, ETIM, eClass Standard
- BALLUFF, BAM00 Series Bracket 12 mm for Use with Mounting System BMS, Holding Rods, ETIM 6.0:EC000127, EClass
- Leuze Reflector Reflector, ETIM, eClass Standard
- BALLUFF, BAM03FA Series Mounting Bracket for Use with BCM R15, ETIM 6.0:EC000127, EClass 9.1:27-27-37-01 Standard
- BALLUFF, BAM02 Series Mounting Bracket 12 mm for Use with Mounting System BMS, EClass 9.1:27-27-37-01, ETIM 6.0:EC000127
- BALLUFF, BAM00 Series Mounting Bracket Mounting Clamp 20 mm for Use with Sensors 20 mm, EClass 9.1:27-27-37-01, ETIM
- BALLUFF, BAM00 Series Mounting Bracket 30 mm for Use with M18 Sensors, ETIM 6.0:EC000127, EClass 9.1:27-27-37-01