Timken 30306 30mm I.D Taper Metric Roller Bearing, 72mm O.D
- RS-stocknr.:
- 193-1002
- Fabrikantnummer:
- 30306
- Fabrikant:
- Timken
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/05/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 31,27
(excl. BTW)
€ 37,84
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 31,27 |
| 5 - 9 | € 29,45 |
| 10 - 24 | € 28,82 |
| 25 + | € 28,24 |
- RS-stocknr.:
- 193-1002
- Fabrikantnummer:
- 30306
- Fabrikant:
- Timken
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- FR
Productomschrijving
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 30mm |
| Outside Diameter | 72mm |
| Roller Bearing Type | Taper |
| Race Width | 20.75mm |
| Bore Type | Tapered |
| Static Load Rating | 65300N |
| Number of Rows | 1 |
| Dynamic Load Rating | 17500 (Radial 90 Million Revolution) N, 67700 (Radial 1 Million Revolution) N, 9460 (Thrust 90 Million Revolution) N |