SKF 30306 Taper 30 mm ID Roller Bearing, 72 mm OD
- RS-stocknr.:
- 207-9994
- Fabrikantnummer:
- 30306
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 28,10
(excl. BTW)
€ 34,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 28,10 |
*prijsindicatie
- RS-stocknr.:
- 207-9994
- Fabrikantnummer:
- 30306
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 30mm | |
| Bore Type | Parallel | |
| Limiting Speed | 10000rpm | |
| Outside Diameter | 72mm | |
| Series | 30306 | |
| Standards/Approvals | No | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 69.2kN | |
| Static Load Rating | 56kN | |
| Cup Width | 16mm | |
| Number of Rows | 1 | |
| Cone Width | 20.75mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 30mm | ||
Bore Type Parallel | ||
Limiting Speed 10000rpm | ||
Outside Diameter 72mm | ||
Series 30306 | ||
Standards/Approvals No | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 69.2kN | ||
Static Load Rating 56kN | ||
Cup Width 16mm | ||
Number of Rows 1 | ||
Cone Width 20.75mm | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 30306-DY Taper 30 mm ID Roller Bearing, 72 mm OD
- Timken 30306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD
- RS PRO 30306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD
- NTN 4T-30306 Taper Roller 30 mm ID Needle Roller Thrust Bearing, 72 mm OD
- SKF 32306 Taper 30 mm ID Roller Bearing, 72 mm OD
- SKF 31306/DF Taper Roller 30 mm ID Tapered Roller Bearing, 72 mm OD
- SKF 31306 Taper 30 mm ID Tapered Roller Bearing, 72 mm OD
- SKF 33207 Taper 35 mm ID Roller Bearing, 72 mm OD