Timken 32207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- RS-stocknr.:
- 193-1023
- Fabrikantnummer:
- 32207
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 34,09
(excl. BTW)
€ 41,25
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 34,09 |
| 5 - 9 | € 32,07 |
| 10 - 24 | € 31,39 |
| 25 + | € 30,77 |
*prijsindicatie
- RS-stocknr.:
- 193-1023
- Fabrikantnummer:
- 32207
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 35mm | |
| Bore Type | Tapered | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 74.9kN | |
| End Type | Shielded | |
| Outside Diameter | 72mm | |
| Static Load Rating | 82.3kN | |
| Cup Width | 19mm | |
| Number of Rows | 1 | |
| Cone Width | 24.25mm | |
| Limiting Speed | 9500rpm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 35mm | ||
Bore Type Tapered | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 74.9kN | ||
End Type Shielded | ||
Outside Diameter 72mm | ||
Static Load Rating 82.3kN | ||
Cup Width 19mm | ||
Number of Rows 1 | ||
Cone Width 24.25mm | ||
Limiting Speed 9500rpm | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- RS PRO 32207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- Timken 33207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- Timken 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- SKF 32207 Taper 35 mm ID Roller Bearing, 72 mm OD
- FAG 32207-XL Taper 35 mm ID Roller Bearing, 72 mm OD
- RS PRO 32207 Taper 35 mm ID Roller Bearing, 72 mm OD
- NTN 4T-32207 Taper Roller 35 mm ID Needle Roller Thrust Bearing, 72 mm OD
- Timken 32306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD