Sensata Cynergy3 Process Pump Controller for Hydromatic, 240 V ac, +60°C
- RS-stocknr.:
- 348-7949
- Fabrikantnummer:
- FCHM
- Fabrikant:
- Sensata / Cynergy3
Subtotaal (1 eenheid)*
€ 238,89
(excl. BTW)
€ 289,06
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- Plus verzending 3 stuk(s) vanaf 17 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 238,89 |
*prijsindicatie
- RS-stocknr.:
- 348-7949
- Fabrikantnummer:
- FCHM
- Fabrikant:
- Sensata / Cynergy3
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Sensata / Cynergy3 | |
| Compatible Pump Type | Hydromatic | |
| Supply Voltage | 240 V ac | |
| Maximum Flow Rate | 100L/min | |
| Connection | 1 in G | |
| IP Rating | IP65 | |
| Maximum Fluid Temperature | +60°C | |
| Maximum Output Pressure | 10bar | |
| Alles selecteren | ||
|---|---|---|
Merk Sensata / Cynergy3 | ||
Compatible Pump Type Hydromatic | ||
Supply Voltage 240 V ac | ||
Maximum Flow Rate 100L/min | ||
Connection 1 in G | ||
IP Rating IP65 | ||
Maximum Fluid Temperature +60°C | ||
Maximum Output Pressure 10bar | ||
- Land van herkomst:
- CN
Sensata Cynergy3 Process Pump Controller, 240V AC, 10 Bar - FCHM Series - FCHM
Ensure a constant supply of water in your system with this process pump controller from Sensata Cynergy3. Its differential pressure sensor automatically reacts to changes in flow rates, so it keeps water systems functioning optimally without the need for manual intervention. There's no need to pre-charge this device with air, which makes it virtually maintenance-free. This pump controller is suitable for use in industrial and commercial water applications.
Features & Benefits
• Dampening system protects against water hammer for reduced wear
• Eliminates the need for a pressure reservoir for greater convenience
• Dry running cut-out to help prevent damage to the system when there's a water supply fault
• Auxiliary fuse protects the control circuit from electrical damage
• Eliminates the need for a pressure reservoir for greater convenience
• Dry running cut-out to help prevent damage to the system when there's a water supply fault
• Auxiliary fuse protects the control circuit from electrical damage
Is the start-up pressure of this pump controller adjustable?
Yes, for added convenience you can adjust the start-up pressure of this pump controller from 1 to 3.5 bar.
Is this pump controller suitable for use in damp or dusty environments?
Yes. It has an IP65 (ingress protection) rating, which means the unit is dust-tight and protected against low-pressure water jets.
Gerelateerde Links
- Sensata Cynergy3 Process Pump Controller, 250 V ac, +45°C
- Xylem Lowara Process Pump Controller for Diaphragm, 220 V, 240 V, +60°C
- Sensata Cynergy3 Level Controller -
- Xylem Process Pump Controller for Standard Liquid Pump, 415 V ac
- Sensata Cynergy3 FS Series Flow Controller, 0.9 L/min, Relay Output, 240 V, 15 mm Pipe
- Sensata Cynergy3 FS Series Flow Controller, 3.75 L/min, Relay Output, 240 V, 22 mm Pipe
- Pump Controllers
- Tele Process Pump Controller, 250 V ac, +55°C
