RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
- RS-stocknr.:
- 125-3567
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 110,69
(excl. BTW)
€ 133,93
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 6 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 110,69 |
*prijsindicatie
- RS-stocknr.:
- 125-3567
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Compatible Pump Type | Brushless Micropump | |
| Supply Voltage | 6 → 28V | |
| Connection | 2 Screw Terminal (Input), 3 Screw Terminal (Output) | |
| IP Rating | IP20 | |
| Maximum Output Pressure | 10bar | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Compatible Pump Type Brushless Micropump | ||
Supply Voltage 6 → 28V | ||
Connection 2 Screw Terminal (Input), 3 Screw Terminal (Output) | ||
IP Rating IP20 | ||
Maximum Output Pressure 10bar | ||
- Land van herkomst:
- GB
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Applications
The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment
Gerelateerde Links
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V, +80°C
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28 V dc
- Xylem Process Pump Controller for Standard Liquid Pump, 415 V ac
- Pump Controllers
- Tele Process Pump Controller, 250 V ac, +55°C
- Sensata Cynergy3 Process Pump Controller, 250 V ac, +45°C
- RS PRO 6 → 28V 10bar Direct drive, Seal-less Coupling Micro Gear Pump Water Pump, 1500ml/min