Fluke MDA-550 III Series, 500 MHz Portable Oscilloscope - RSCAL

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 9.928,50

(excl. BTW)

€ 12.013,48

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 2 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 9.928,50

*prijsindicatie

RS-stocknr.:
280-6619
Fabrikantnummer:
FLUKE-MDA-550/FPC EU
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Product Type

Oscilloscope

Bandwidth

500MHz

Oscilloscope Type

Portable

Oscilloscope Form

Digital Storage

Memory Depth

400Mpts

Interface Type

USB

Series

MDA-550 III

Standards/Approvals

IEC 61010-2-030, IEC 61010-3

Calibrated

RSCAL

Power Source

Battery

Safety Category Level

CAT III, CAT IV

Battery Life

7h

Battery Type

Lithium-ion

Safety Category Voltage

1000V

Land van herkomst:
RO

Fluke MDA-550 Series Oscilloscope, 500MHz Bandwidth, Portable Type - FLUKE-MDA-550/FPC EU


This portable oscilloscope functions as a mixed-domain motor-drive analyser for fault finding on inverter motor systems. It guides users through connections and test selection, captures voltage, current and harmonics measurements, and generates on-instrument text reports for as-found and as-left documentation in industrial settings.

Features & Benefits


• 500MHz bandwidth delivers high-frequency capture for fast transients
• Four-channel input supports simultaneous multi-point analysis
• Battery operation enables field measurements without mains power
• USB Interface and WiFi support simplify data transfer to PC
• Extended harmonics to 150kHz reveals high-order switching noise
• Shaft-voltage probe set detects impulse discharges to prevent bearing damage

Applications


• Suitable for troubleshooting inverter drive input and output faults
• Ideal for assessing DC bus ripple under load conditions
• Used for extended harmonics surveys on industrial power systems
• Can be used for motor shaft voltage diagnostics to prevent bearing failure
• Suitable for commissioning and benchmarking drive performance over time

What insulation-stress measurements can be performed on PWM outputs?


The instrument reports dV/dt, rise/fall times and Peak voltages to assess insulation exposure from Rapid voltage changes.

How are harmonics analysed across different frequency bands?


Harmonic analysis covers DC–51st, 1–9kHz and 9–150kHz ranges, Plus a spectrum mode for voltage modulation up to500MHz.

How is data captured and exported for reporting?


Users can save approximately50 screens to an on-instrument text report, then transfer via mini-USB, USB stick up to32GB or WiFi using supplied PC software.

What safety-rated measurements are supported at the service entrance?


The measuring inputs accept up to1000V to earth and are rated for600V CAT IV/1000V CAT III via compatible high-voltage probes.

Which probe and clamp options allow current and shaft diagnostics?


The tool supports multiple voltage probe ratios and current-clamp scale factors from0.1mV/A to400mV/A, Plus a shaft-voltage set with carbon-fibre brushes for discharge detection.

Gerelateerde Links