Fluke Fluke 190 series III ScopeMeter Series, 500 MHz Portable Oscilloscope, 4 Channels, RSCAL

RS-stocknr.:: 280-6550
Fabrikantnummer:: FLUKE-MDA-550-III
Fabrikant:: Fluke

Fluke Fluke 190 series III ScopeMeter Series, 500 MHz Portable Oscilloscope, 4 Channels, RSCAL

Subtotaal (1 eenheid)*

€ 9.795,00

(excl. BTW)

€ 11.851,95

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 22 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 9.795,00

*prijsindicatie

RS-stocknr.:: 280-6550
Fabrikantnummer:: FLUKE-MDA-550-III
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Product Type	Oscilloscope
	Bandwidth	500MHz
	Number of Channels	4
	Oscilloscope Type	Portable
	Oscilloscope Form	Digital Storage
	Interface Type	USB/WiFi
	Series	Fluke 190 series III ScopeMeter
	Standards/Approvals	IEC 61010-2-030, IEC 61010-3
	Battery Type	Rechargeable Lithium-ion
	Calibrated	RSCAL
	Display Type	Colour
	Power Source	Mains, Battery
	Safety Category Level	CAT III, CAT IV
	Safety Category Voltage	1000V

	Alles selecteren
	Merk Fluke
	Product Type Oscilloscope
	Bandwidth 500MHz
	Number of Channels 4
	Oscilloscope Type Portable
	Oscilloscope Form Digital Storage
	Interface Type USB/WiFi
	Series Fluke 190 series III ScopeMeter
	Standards/Approvals IEC 61010-2-030, IEC 61010-3
	Battery Type Rechargeable Lithium-ion
	Calibrated RSCAL
	Display Type Colour
	Power Source Mains, Battery
	Safety Category Level CAT III, CAT IV
	Safety Category Voltage 1000V

Land van herkomst:: RO

Fluke 190 series III ScopeMeter Series Oscilloscope, 500MHz Bandwidth, Colour Display - FLUKE-MDA-550-III

This oscilloscope is a portable digital storage instrument designed for field service and industrial motor-drive analysis, delivering colour display visualisation and flexible mains or battery operation. It supports multi-channel waveform capture and guided test procedures to simplify inspection of inverter-type motor-drive systems, from power input through DC bus to the motor shaft, while permitting data transfer via USB or Wi-Fi.

Features and Benefits:

• 500MHz bandwidth for high-frequency waveform detail
• Four channels enable simultaneous multi-point measurements
• Rechargeable lithium‑ion battery allows mains or battery operation
• CAT III and CAT IV safety levels permit high-voltage site work
• USB and Wi-Fi connectivity for Rapid data export and reporting

Applications

• Suitable for motor-drive input and output diagnostics
• Ideal for measuring DC bus voltage and ripple dynamically
• Used for detecting shaft voltage discharge events
• Can be used for extended harmonic spectrum analysis
• Suitable for field recording and on‑site report generation

What measurement ranges are available for frequency analysis?

The instrument measures frequency from 1.000Hz up to 500MHz with 9999 count display capability.

How does it capture PWM and modulation characteristics?

PWM voltage is evaluated using averaged samples over whole periods and voltage modulation readings include dV, dt and dV/dt metrics for rise time and impulse analysis.

What probe options and scaling are supported for current and voltage?

Voltage probes include 1:1, 10:1, 100:1, 1000:1, 20:1 and 200:1 ratios while current clamps offer scale factors from 0.1mV/A to 400mV/A.

How many report screens can be saved and transferred?

Typical report capture allows around 50 screens, transferable via USB stick, mini‑USB cable or Wi-Fi link using the supplied software.

What safety voltages apply between terminals and earth?

Maximum voltage between any Terminal and earth is 1000V, and probe‑rated inputs permit 1000V CAT III or 600V CAT IV where specified.

Supplied with

• 1x BP 291 li-ion battery pack
• 1x BC190 charger/power adapter
• 3x VPS421 100:1 high voltage probes with alligator clips
• 1x VPS410-II-R 10:1 500MHz voltage probe
• 3x i400s ac current clamp
• 1x SVS-500 shaft voltage set (3x brush
• Probe holder
• Two-piece extension rod and magnetic base
• Large size, protective carrying case with rollers (C437-II)
• FlukeView-2 PC software (full version)
• WiFi dongle