Fluke ScopeMeter III Series, 500 MHz Portable Oscilloscope, 4 Channels - UKAS

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 9.578,00

(excl. BTW)

€ 11.589,38

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 1 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 9.578,00

*prijsindicatie

RS-stocknr.:
280-6551
Fabrikantnummer:
FLUKE-MDA-550-III
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Product Type

Oscilloscope

Bandwidth

500MHz

Number of Channels

4

Oscilloscope Type

Portable

Oscilloscope Form

Digital Storage

Series

ScopeMeter III

Standards/Approvals

No

Battery Type

Rechargeable Lithium-ion

Calibrated

UKAS

Display Type

Colour

Safety Category Level

CAT III, CAT IV

Safety Category Voltage

1000V

Power Source

Mains, Battery

Land van herkomst:
RO

Fluke ScopeMeter III Series Oscilloscope, 500MHz Bandwidth, 4 Channels - FLUKE-MDA-550-III


This oscilloscope is a portable diagnostic instrument designed for motor-drive and industrial electrical troubleshooting. It combines oscilloscope, waveform analyser and data-logger functions in a handheld unit to capture voltage, current, DC bus and PWM signals across drive input, output and motor connections. The instrument operates from mains or its rechargeable battery and is intended for field use where guided test set-ups and automated measurements speed fault finding.

Features & Benefits


• 500MHz bandwidth for high-frequency signal capture and analysis
• Four-channel input enabling simultaneous multi-point measurements
• Guided measurement routines reduce set-up time and error
• Extensive harmonic ranges up to 150kHz for distortion identification
• Built-in report generator to save and export test screens
• Battery and mains operation for flexible on-site testing

Applications


• Suitable for commissioning and fault diagnosis of inverter drives
• Ideal for assessing DC bus ripple under dynamic load
• Used for detecting motor shaft voltage discharge events
• Can be used to verify V/Hz ratios and voltage modulation effects
• Used with current clamps to analyse input and output current harmonics

What measurement ranges support high-frequency spectrum analysis?


The instrument provides harmonic analysis from the fundamental up to the 51st harmonic and spectrum bands covering 1–9kHz, 9–150kHz and higher-frequency voltage modulation measurements up to 500MHz.

How are voltage and current connections assisted during tests?


On-screen, step-by-step graphical diagrams guide probe placement for drive input, DC bus, drive output and motor input locations to ensure correct voltage and current signal acquisition.

What safety and input voltage limits apply during field use?


The tool supports maximum voltages to earth up to 1000V and is specified for use with high-voltage probes and clamps to maintain safe measurement across common industrial systems.

How is recorded data transferred for further analysis?


Report screens and recordings can be saved to USB storage or transferred via mini-USB or Wi‑Fi and opened using supplied PC software for detailed review.

Supplied with

• 1x BP 291 li-ion battery pack
• 1x BC190 charger/power adapter
• 3x VPS421 100:1 high voltage probes with alligator clips
• 1x VPS410-II-R 10:1 500MHz voltage probe
• 3x i400s ac current clamp
• 1x SVS-500 shaft voltage set (3x brush
• Probe holder
• Two-piece extension rod and magnetic base
• Large size, protective carrying case with rollers (C437-II)
• FlukeView-2 PC software (full version)
• WiFi dongle

Gerelateerde Links