Applied Motion Systems Stepper Motor Controller, 0.3 → 2.2 A, 12 → 48 V dc
- RS-stocknr.:
- 877-7216
- Fabrikantnummer:
- STR-2M
- Fabrikant:
- Applied Motion Systems
Subtotaal (1 eenheid)*
€ 244,27
(excl. BTW)
€ 295,57
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 5 stuk(s) vanaf 08 december 2025
- Plus verzending 16 stuk(s) vanaf 08 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 244,27 |
*prijsindicatie
- RS-stocknr.:
- 877-7216
- Fabrikantnummer:
- STR-2M
- Fabrikant:
- Applied Motion Systems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Applied Motion Systems | |
| Current Rating | 0.3 → 2.2 A | |
| Voltage Rating | 12 → 48 V dc | |
| Overall Length | 93mm | |
| Overall Width | 56mm | |
| Overall Depth | 21mm | |
| Alles selecteren | ||
|---|---|---|
Merk Applied Motion Systems | ||
Current Rating 0.3 → 2.2 A | ||
Voltage Rating 12 → 48 V dc | ||
Overall Length 93mm | ||
Overall Width 56mm | ||
Overall Depth 21mm | ||
- Land van herkomst:
- US
STR - Stepper Drive
STR - High Performance Stepper Drive.
Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolution.
Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolution.
STR Stepper Drive
Dual H-bridge, 4 quadrant
4 state PWM at 16 kHz
Switch Selectable Parameters
Anti-Resonance
Microstepping
Microstep Emulation
Self Test
Simple Setup, no software required
Gerelateerde Links
- Applied Motion Systems Stepper Motor Controller, 10 A
- Applied Motion Systems Stepper Motor Controller, 5 A
- Applied Motion Systems Stepper Motor Controller, 0.1 → 5 A, 24 → 48 V dc
- Applied Motion Systems Stepper Motor Controller, 0.1 → 10 A, 24 → 80 V dc
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 23mm Frame,
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 42mm Frame,
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.48Nm Torque, 12 → 48 V, 1.8°, 17mm Frame, 5mm
- Applied Motion Systems Encoder for Use with ST10-Si, ST5-Si
