Applied Motion Systems Stepper Motor Controller, 10 A
- RS-stocknr.:
- 455-863
- Fabrikantnummer:
- ST10-SI
- Fabrikant:
- Applied Motion Systems
Subtotaal (1 eenheid)*
€ 1.062,30
(excl. BTW)
€ 1.285,38
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.062,30 |
*prijsindicatie
- RS-stocknr.:
- 455-863
- Fabrikantnummer:
- ST10-SI
- Fabrikant:
- Applied Motion Systems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Applied Motion Systems | |
| Current Rating | 10 A | |
| Overall Length | 127mm | |
| Overall Width | 76mm | |
| Overall Depth | 44.5mm | |
| Alles selecteren | ||
|---|---|---|
Merk Applied Motion Systems | ||
Current Rating 10 A | ||
Overall Length 127mm | ||
Overall Width 76mm | ||
Overall Depth 44.5mm | ||
- Land van herkomst:
- US
ST5-Si and ST10-Si Programmable Stepper Drive
ST5-Si and ST10-Si programmable step drives offer the following features:
Software setup using ST Configurator (software included)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)
Gerelateerde Links
- Applied Motion Systems Stepper Motor Controller, 10 A
- Applied Motion Systems Stepper Motor Controller, 5 A
- Applied Motion Systems Stepper Motor Controller, 0.1 → 10 A, 24 → 80 V dc
- Applied Motion Systems Stepper Motor Controller, 0.3 → 2.2 A, 12 → 48 V dc
- Applied Motion Systems Encoder for Use with ST10-Si, ST5-Si
- Applied Motion Systems Stepper Motor Controller, 0.1 → 5 A, 24 → 48 V dc
- Applied Motion Systems Network Module for Use with ST10-Si, ST5-Si
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 23mm Frame,