Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.48Nm Torque, 12 → 48 V, 1.8°, 17mm Frame, 5mm
- RS-stocknr.:
- 877-7222
- Fabrikantnummer:
- STM17S-3AN
- Fabrikant:
- Applied Motion Systems
3 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 399,59
(excl. BTW)
€ 483,50
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 399,59 |
- RS-stocknr.:
- 877-7222
- Fabrikantnummer:
- STM17S-3AN
- Fabrikant:
- Applied Motion Systems
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- US
Productomschrijving
Integrated Steppers STM17S
The STM17S is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.
Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 17 frame size
Input voltage 12-48 Vdc
3 digital input, 1 analog input
1 digital output
RS232 interface
Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Applied Motion Systems - Stepper Motor
Specificaties
Kenmerk | Waarde |
|---|---|
| Stepper Motor Type | Dual Hybridge |
| Step Angle | 1.8° |
| Holding Torque | 0.48Nm |
| Number Of Wires | 8 |
| Supply Voltage | 12 → 48 V |
| Frame Size | 17mm |
| Shaft Diameter | 5mm |
| Current Rating | 2 A |
| Shaft Length | 22mm |
| Depth | 81mm |
| Output Speed | 200 → 51200 spm |
| Series | STM |
| Standards Met | CE EN61800-3:2004, RoHS Compliant |
- RS-stocknr.:
- 877-7222
- Fabrikantnummer:
- STM17S-3AN
- Fabrikant:
- Applied Motion Systems