Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 2mA to 500mA, 20.4 → 26.4 V dc, 26.4V ac

RS-stocknr.:: 111-3102
Fabrikantnummer:: K8DT-AW1TD
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 2mA to 500mA, 20.4 → 26.4 V dc, 26.4V ac

Subtotaal (1 eenheid)*

€ 158,47

(excl. BTW)

€ 191,75

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 16 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,47

*prijsindicatie

RS-stocknr.:: 111-3102
Fabrikantnummer:: K8DT-AW1TD
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	2mA
	Maximum Current Sensed	500mA
	Power Consumption	1.8VA
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Push-in
	Time Delay	250 ms
	IP Rating	IP20
	Relay Contact Current	2mA, 500mA
	Supply AC Voltage	26.4V ac
	Minimum Operating Temperature	+60°C
	Supply DC Voltage	20.4 → 26.4 V dc
	Maximum Operating Temperature	60°C
	Series	K8DT-AW
	Width	17.5mm
	Length	90mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Height	90mm

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 2mA
	Maximum Current Sensed 500mA
	Power Consumption 1.8VA
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Push-in
	Time Delay 250 ms
	IP Rating IP20
	Relay Contact Current 2mA, 500mA
	Supply AC Voltage 26.4V ac
	Minimum Operating Temperature +60°C
	Supply DC Voltage 20.4 → 26.4 V dc
	Maximum Operating Temperature 60°C
	Series K8DT-AW
	Width 17.5mm
	Length 90mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Height 90mm

Land van herkomst:: CN

Omron K8DT-AW Series Monitoring Relay, 20.4 to 26.4V Supply Voltage, 2 mA to 500 mA Relay Contact Current - K8DT-AW1TD

This monitoring relay provides single-phase current sensing to detect both undercurrent and overcurrent conditions in control panels and automation systems. It operates from either AC or DC supply within a narrow voltage window and mounts neatly on standard DIN-rail assemblies for integration into electrical enclosures.

Features and Benefits:

• Detects currents from 2 mA to 500 mA for precise monitoring capabilities
• SPST contact configuration for straightforward switching operations
• Push-in terminals enable Rapid wiring and serviceability
• 250 MS response time to distinguish transient events from faults
• Low power draw at 1.8 VA to minimise supply loading
• IP20 enclosure rating for protected internal-panel use

Applications

• Suitable for motor-run detection in industrial control cabinets
• Ideal for monitoring small loads in HVAC control systems
• Used with single-phase supply lines for preventive maintenance alerts
• Can be used for line-loss and leakage detection in process equipment

What voltage range is required to power the device?

It accepts supply voltages between 20.4 and 26.4V in either AC or DC form.

How are field connections MADE to the unit?

Wiring connects via push-in terminals that allow tool-free conductor insertion and secure retention.

What mounting provision does the product use?

It clips onto a DIN rail for Compact panel installation and straightforward removal.

What environmental temperatures can it withstand during operation?

The unit is rated to operate down to -20 °C and up to 60 °C.

Which electrical phase does it monitor and what contact currents are supported?

It monitors a single-phase circuit and supports relay contact currents of 2 mA and 500 mA.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals