Atmel ATSAMW25-XPRO 2.7 → 3.6V WiFi Module Evaluation Kit, 802.11b/g/n I2C, IrDA, LIN2, SPI, USART

Bekijk alle Wi-Fi Modules
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
RS-stocknr.:
885-2017
Fabrikantnummer:
ATSAMW25-XPRO
Fabrikant:
Atmel
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Atmel

Supported Protocol

802.11b/g/n

Supported Security Standards

SSL, TLS, WAPI, WEP, WPA, WPA2

Supported Bus Interfaces

I2C, IrDA, LIN2, SPI, USART

Supply Voltage

2.7 → 3.6V

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Land van herkomst:
MY

SmartConnect ATSAMW25-XPRO Evaluation Kit


The ATSAMW25 Xplained Pro Evaluation Kit forms part of the SmartConnect family of wireless solutions from Atmel. With the kit you can evaluate the ATSAM25H18-MR510PB WiFi module with support from Atmel Studio software.

Features & Benefits of the ATSAMW25-XPRO Evaluation Kit
•WiFi Module based on a combination of the 2/4 GHz IEEE® 802.11 b/g/n WiFi SoC and the ARM® Cortex® - M0+ ATSAMD21G18A microcontroller.
•On-board embedded debugger
•2 mechanical buttons
•1 yellow user LED
•1 WiFi status LED
•1 extension header
•Embedded debugger USB
•Target USB
•8 Mbit serial flash
•32 kHz crystal
•12 MHz crystal


SmartConnect Wi-Fi low power solutions allow engineers without any 802.11, RTOS, IP stack or RF experience, to easily integrate Wi-Fi into their IoT designs. The SmartConnect turnkey software that is available in Atmel Studio enables engineers to dedicate more time to adding functionality to their designs.

Gerelateerde Links