H&D Wireless SPB106-AP-1 2.7 → 3.6V WLAN Module, 802.11b/g SDIO, SPI

Bekijk alle Wi-Fi Modules
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 33,96

(excl. BTW)

€ 41,09

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks
Per stuk
1 - 1€ 33,96
2 - 4€ 33,82
5 +€ 33,15

*prijsindicatie

RS-stocknr.:
708-0066
Fabrikantnummer:
SPB106-AP-1
Fabrikant:
H&D Wireless
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

H&D Wireless

Supported Protocol

802.11b/g

Supported Security Standards

AES, WEP

Supported Bus Interfaces

SDIO, SPI

Supply Voltage

2.7 → 3.6V

Length

25.8mm

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

-20 °C

Width

20.6mm

Surface mount WiFi board


The SPB106 is an SMD module with the HDG104 WLAN System-In-Package and all peripheral components required. It is a complete solution designed to be surface mounted on any host system requiring 802.11b/g WiFi. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. The host interface supports SPI communication when used with the 10-pin RF-header connection (WLESS), and SDIO when used in a custom board with the AVR32UC3A3. Software drivers and a complete application example are included in Atmel AVR32 UC3B Software Framework from release 1.5.0 onwards

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128 bits
Chip Antenna and connector for external antenna (optional) mounted on the board
Low power consumption due to efficient class AB PA design
UMA Compliant
Advanced power management for optimum power consumption at varying load
Bluetooth co-existence support
Power Supply: +3.3V from EVK board
Small footprint 25.8 x 20.6mm


WLAN (Wireless Local Area Network) - H & D Wireless

Gerelateerde Links