Chauvin Arnoux, LED Voltage Tester, 750V ac Continuity Check, Battery Powered CAT IV, P01191742D

RS-stocknr.:: 914-0025
Fabrikantnummer:: P01191742D
Fabrikant:: Chauvin Arnoux

Chauvin Arnoux, LED Voltage Tester, 750V ac Continuity Check, Battery Powered CAT IV, P01191742D

Subtotaal (1 eenheid)*

€ 102,01

(excl. BTW)

€ 123,43

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

13 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 102,01

*prijsindicatie

Kalibratie-opties

Chauvin Arnoux CA742 IP2X Voltage Indicator, 690 V ac, 750 V dc, Continuity Check, Battery Powered, CAT IV 600 V With

Calibration Type:: RSCAL

RS-stocknr.: 913-6858

Per stuk

€ 119,00

(excl. BTW)

€ 143,99

(incl. BTW)

RS-stocknr.:: 914-0025
Fabrikantnummer:: P01191742D
Fabrikant:: Chauvin Arnoux

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Chauvin Arnoux
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	LED
	IP Rating	IP65
	Battery Type	AAA LR3
	Power Source	Battery
	Weight	210g
	Minimum Operating Temperature	-15°C
	Maximum Voltage	750V ac
	Maximum Operating Temperature	45°C
	Standards/Approvals	IEC 613261, IEC 612433
	Hazardous Area Certification	No
	Length	163mm
	Height	40mm
	Width	64 mm
	Safety Category Voltage	600V
	Safety Category Level	CAT IV

	Alles selecteren
	Merk Chauvin Arnoux
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type LED
	IP Rating IP65
	Battery Type AAA LR3
	Power Source Battery
	Weight 210g
	Minimum Operating Temperature -15°C
	Maximum Voltage 750V ac
	Maximum Operating Temperature 45°C
	Standards/Approvals IEC 613261, IEC 612433
	Hazardous Area Certification No
	Length 163mm
	Height 40mm
	Width 64 mm
	Safety Category Voltage 600V
	Safety Category Level CAT IV

N.v.t.

Land van herkomst:: CN

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742

Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Features and Benefits

Full integrated autotest

Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC

Single-pole phase test

Phase sequence testing up to 400 Hz

Input impedance >300 kΩ

Continuity testing

Removable test probe and cable

Dimensions 163 x 64 x 40 mm

IP65 protection rating

Weight 210 g

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Note

The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Standards

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate