Chauvin Arnoux CA 742, LED Voltage tester, 690 V ac, 750V dc, Continuity Check, Battery Powered, CAT IV

Subtotaal (1 eenheid)*

€ 90,90

(excl. BTW)

€ 109,99

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 40 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 20 stuk(s) vanaf 15 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 90,90

*prijsindicatie

Kalibratie-opties

la pièce

163,90 €

(excl. BTW)

198,32 €

(incl. BTW)

RS-stocknr.:
914-0021
Fabrikantnummer:
P01191742Z
Fabrikant:
Chauvin Arnoux
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Chauvin Arnoux

Maximum Voltage

690 V ac, 750V dc

Continuity Check

Yes

Safety Category

CAT IV 600V

Display Type

LED

IP Rating

IP65

Battery Type

AAA, LR03

Power Source

Battery

Dimensions

163 x 64 x 40mm

Weight

210g

Height

40mm

Length

163mm

Maximum Operating Temperature

+45°C

Width

64mm

Safety Category Voltage

600V

Safety Category Level

CAT IV

Model Number p

CA 742

Minimum Operating Temperature

-15°C

Vrijgesteld

Land van herkomst:
CN

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742


Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Features and Benefits


Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >300 kΩ
Continuity testing
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Note

The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Standards

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate


Voltage Level Indicators


A range of voltage testers each available in versions suitable for electronic or electrical applications.

Gerelateerde Links