Klein Tools NCVT1P, LCD Non-Contact Voltage Detector, 1000V ac Continuity Check, Battery Powered CAT IV, RSCAL, NCVT1P
- RS-stocknr.:
- 877-150
- Fabrikantnummer:
- NCVT1P
- Fabrikant:
- Klein Tools
Subtotaal (1 eenheid)*
€ 86,88
(excl. BTW)
€ 105,12
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 10 stuk(s) vanaf 24 september 2026
- Plus verzending 11 stuk(s) vanaf 05 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 86,88 |
*prijsindicatie
- RS-stocknr.:
- 877-150
- Fabrikantnummer:
- NCVT1P
- Fabrikant:
- Klein Tools
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Klein Tools | |
| Product Type | Non-Contact Voltage Detector | |
| Continuity Check | Yes | |
| Display Type | LCD | |
| IP Rating | IP40 | |
| Battery Type | AAA | |
| Power Source | Battery | |
| Weight | 23g | |
| Minimum Operating Temperature | -22°F | |
| Maximum Voltage | 1000V ac | |
| Maximum Operating Temperature | 482°F | |
| Height | 18mm | |
| Hazardous Area Certification | No | |
| Length | 140mm | |
| Standards/Approvals | CE UKCA, CAT IV 1000V | |
| Width | 25mm | |
| Safety Category Level | CAT IV | |
| Calibrated | RSCAL | |
| Safety Category Voltage | 1000V ac | |
| Model Number | NCVT1P | |
| Alles selecteren | ||
|---|---|---|
Merk Klein Tools | ||
Product Type Non-Contact Voltage Detector | ||
Continuity Check Yes | ||
Display Type LCD | ||
IP Rating IP40 | ||
Battery Type AAA | ||
Power Source Battery | ||
Weight 23g | ||
Minimum Operating Temperature -22°F | ||
Maximum Voltage 1000V ac | ||
Maximum Operating Temperature 482°F | ||
Height 18mm | ||
Hazardous Area Certification No | ||
Length 140mm | ||
Standards/Approvals CE UKCA, CAT IV 1000V | ||
Width 25mm | ||
Safety Category Level CAT IV | ||
Calibrated RSCAL | ||
Safety Category Voltage 1000V ac | ||
Model Number NCVT1P | ||
- Land van herkomst:
- CN
The Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED indicates the tester is powered on. It changes to red and an audible tone sounds when voltage is detected.
Auto power-off
Traces open-ended, non-energized wiring when used with Toner-Pro Tone Generator (VDV500-063, sold separately)
Terminal Block on probe to confirm the toned pair has been located
Low battery indicator
Gerelateerde Links
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,