Gossen Metrawatt M611G, LED Voltage Tester, 1000V ac Continuity Check, Battery Powered CAT II, CAT III, CAT IV, M611G
- RS-stocknr.:
- 645-139
- Fabrikantnummer:
- M611G
- Fabrikant:
- Gossen Metrawatt
Subtotaal (1 eenheid)*
€ 73,73
(excl. BTW)
€ 89,21
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 73,73 |
*prijsindicatie
- RS-stocknr.:
- 645-139
- Fabrikantnummer:
- M611G
- Fabrikant:
- Gossen Metrawatt
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Gossen Metrawatt | |
| Product Type | Voltage Tester | |
| Continuity Check | Yes | |
| Display Type | LED | |
| RCD Trip Test | Yes | |
| IP Rating | IP64 | |
| Battery Type | IEC AAA | |
| Power Source | Battery | |
| Weight | 275g | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 50°C | |
| Maximum Voltage | 1000V ac | |
| Height | 35mm | |
| Standards/Approvals | 2014/35/EU, 2014/30/EU, DIN EN IEC 61326-1, DIN EN IEC 61243-3 | |
| Hazardous Area Certification | No | |
| Width | 75mm | |
| Length | 280mm | |
| Safety Category Voltage | 1000V ac | |
| Safety Category Level | CAT II, CAT III, CAT IV | |
| Model Number | M611G | |
| Alles selecteren | ||
|---|---|---|
Merk Gossen Metrawatt | ||
Product Type Voltage Tester | ||
Continuity Check Yes | ||
Display Type LED | ||
RCD Trip Test Yes | ||
IP Rating IP64 | ||
Battery Type IEC AAA | ||
Power Source Battery | ||
Weight 275g | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 50°C | ||
Maximum Voltage 1000V ac | ||
Height 35mm | ||
Standards/Approvals 2014/35/EU, 2014/30/EU, DIN EN IEC 61326-1, DIN EN IEC 61243-3 | ||
Hazardous Area Certification No | ||
Width 75mm | ||
Length 280mm | ||
Safety Category Voltage 1000V ac | ||
Safety Category Level CAT II, CAT III, CAT IV | ||
Model Number M611G | ||
- Land van herkomst:
- CN
Gossen-Metrawatt Voltage Tester, 1000V ac Safety Category Voltage, IP64 - M611G
This voltage tester is a battery-powered diagnostic tool designed for electrical measurement and verification in demanding field conditions. It provides Visual indication via an LED display and supports essential tests such as RCD trip and continuity checks while operating across a wide ambient temperature range. The instrument is intended for use where daily portable electrical testing and safety verification are required.
Features and Benefits:
• 1000Vac safety rating enables high-voltage verification
• LED display provides clear status indication
• Battery operation allows untethered field use
• IP64 ingress protection resists dust and water spray
• RCD trip and continuity checks support functional testing
• LED display provides clear status indication
• Battery operation allows untethered field use
• IP64 ingress protection resists dust and water spray
• RCD trip and continuity checks support functional testing
Applications
• Suitable for on-site electrical safety inspections
• Ideal for maintenance of distribution boards and circuits
• Used with portable test procedures in industrial environments
• Can be used for verification during commissioning and fault-finding
• Suitable for use across varied ambient temperature ranges
• Ideal for maintenance of distribution boards and circuits
• Used with portable test procedures in industrial environments
• Can be used for verification during commissioning and fault-finding
• Suitable for use across varied ambient temperature ranges
What power source does it use?
It runs on IEC AAA batteries which permit portable operation.
Which safety categories does it support?
It meets CAT II, CAT III and CAT IV levels for varied installation environments.
What environmental conditions can it operate within?
It functions between -15°C and 50°C and has IP64 protection against dust and water spray.
What measurements and tests are available?
It performs voltage checks up to 1000Vac, continuity verification and RCD trip testing.
How Compact and transportable is the instrument?
The unit weighs 275 g and is shaped for handheld portability with a length of 280 mm, width of 75 mm and height of 35 mm.
Gerelateerde Links
- Gossen Metrawatt M611G, LED Voltage Tester, 1000V ac Continuity Check, Battery Powered CAT II, CAT III, CAT IV, RSCAL,
- Gossen Metrawatt M611L, 7 Segment Voltage Tester, 1000V ac Continuity Check, Battery Powered CAT II, CAT III, CAT IV,
- Gossen Metrawatt M611H, LED Voltage Tester, 1000V ac Continuity Check, Battery Powered CAT II, CAT III, CAT IV, M611H
- Gossen Metrawatt DUSPOL expert 1000, LED Voltage Tester, 1000V ac/dc Continuity Check, Battery Powered CAT III, CAT IV,
- Gossen Metrawatt PROFISAFE 690L, LCD Voltage Tester, 690V Continuity Check CAT III, CAT IV, M630J
- Gossen Metrawatt DUSPOL digital 1000, LCD Voltage Tester, 1000 V ac, 1200V dc Continuity Check, Battery Powered CAT IV,
- Gossen Metrawatt METRAVOLT 12D+L, LCD Voltage Tester, 1000 V ac, 1500V dc Continuity Check, Battery Powered CAT III, CAT
- UNI-T UT18C, LCD Continuity Checker, 690V Continuity Check, Battery Powered CAT IV, CAT III, UT18C
