Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, OTG, USB 2.0, UTMI + ULPI, 3.3 V, 32-Pin QFN
- RS-stocknr.:
- 177-9859
- Fabrikantnummer:
- USB3300-EZK-TR
- Fabrikant:
- Microchip
Subtotaal (1 verpakking van 10 eenheden)*
€ 13,06
(excl. BTW)
€ 15,80
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 3.470 stuk(s) vanaf 17 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,306 | € 13,06 |
*prijsindicatie
- RS-stocknr.:
- 177-9859
- Fabrikantnummer:
- USB3300-EZK-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Number of Transceivers | 3 | |
| Protocols Supported | OTG, USB 2.0, UTMI + ULPI | |
| IC Type | Transceiver IC | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 32 | |
| Dimensions | 5.1 x 5.1 x 0.95mm | |
| Height | 0.95mm | |
| Length | 5.1mm | |
| Maximum Operating Temperature | +85 °C | |
| Width | 5.1mm | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Number of Transceivers 3 | ||
Protocols Supported OTG, USB 2.0, UTMI + ULPI | ||
IC Type Transceiver IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 32 | ||
Dimensions 5.1 x 5.1 x 0.95mm | ||
Height 0.95mm | ||
Length 5.1mm | ||
Maximum Operating Temperature +85 °C | ||
Width 5.1mm | ||
Minimum Operating Temperature -40 °C | ||
- Land van herkomst:
- TW
The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.
USB-IF Hi-Speed
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
Gerelateerde Links
- Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, OTG, USB 2.0, UTMI + ULPI, 3.3 V, 32-Pin QFN
- Microchip USB3300-EZK, USB Transceiver, USB 2.0, 3.3 V, 32-Pin QFN
- Microchip USB3320C-EZK-TR, USB Transceiver, USB 2.0, 1.8 V, 3.3 V, 32-Pin QFN
- Microchip USB3320C-EZK, USB Transceiver, 480Mbps, USB 2.0, 32-Pin QFN
- Microchip USB3340-EZK-TR, USB Transceiver, 480Mbps, USB 2.0, 5.5 V, 32-Pin QFN
- USB 2.0 micro-B OTG cable 0.2 m Black
- Microchip USB2514BI-AEZG-TR, USB Controller, I2C, USB 2.0, 3.3 V, 36-Pin QFN
- Microchip USB3317C-CP-TR, USB Transceiver, USB 2.0, 1.8 to 3.3 V, 24-Pin QFN
