Microchip, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN
- RS-stocknr.:
- 177-9703
- Fabrikantnummer:
- USB3300-EZK-TR
- Fabrikant:
- Microchip
Subtotaal (1 rol van 5000 eenheden)*
€ 6.255,00
(excl. BTW)
€ 7.570,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 24 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 5000 + | € 1,251 | € 6.255,00 |
*prijsindicatie
- RS-stocknr.:
- 177-9703
- Fabrikantnummer:
- USB3300-EZK-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | USB Transceiver | |
| Number of Transceivers | 3 | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 32 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | UTMI + ULPI, OTG, USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Length | 5.1mm | |
| Height | 0.95mm | |
| Series | USB3300 | |
| Width | 5.1 mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type USB Transceiver | ||
Number of Transceivers 3 | ||
Sub Type Transceiver | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.3V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 32 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols UTMI + ULPI, OTG, USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Length 5.1mm | ||
Height 0.95mm | ||
Series USB3300 | ||
Width 5.1 mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- Land van herkomst:
- TW
The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.
USB-IF Hi-Speed
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
Gerelateerde Links
- Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, OTG, USB 2.0, UTMI + ULPI, 3.3 V, 32-Pin QFN
- Microchip USB3300-EZK, USB Transceiver, USB 2.0, 3.3 V, 32-Pin QFN
- Microchip USB3320C-EZK-TR, USB Transceiver, USB 2.0, 1.8 V, 3.3 V, 32-Pin QFN
- Microchip USB3340-EZK-TR, USB Transceiver, 480Mbps, USB 2.0, 5.5 V, 32-Pin QFN
- Microchip USB3320C-EZK, USB Transceiver, 480Mbps, USB 2.0, 32-Pin QFN
- Microchip LAN8710AI-EZK-ABC, Ethernet Transceiver, 100Mbps MII, RMII, 3.3 V, 32-Pin QFN
- Microchip USB2514BI-AEZG-TR, USB Controller, I2C, USB 2.0, 3.3 V, 36-Pin QFN
- Microchip USB3317C-CP-TR, USB Transceiver, USB 2.0, 1.8 to 3.3 V, 24-Pin QFN