FTDI Chip FT601Q-B-T, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN
- RS-stocknr.:
- 146-6840
- Fabrikantnummer:
- FT601Q-B-T
- Fabrikant:
- FTDI Chip
Subtotaal (1 eenheid)*
€ 8,53
(excl. BTW)
€ 10,32
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 1.813 stuk(s) vanaf 18 maart 2026
- Plus verzending 780 stuk(s) vanaf 29 april 2026
- Plus verzending 1.040 stuk(s) vanaf 24 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 8,53 |
*prijsindicatie
- RS-stocknr.:
- 146-6840
- Fabrikantnummer:
- FT601Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Maximum Data Rate | 5Gbps | |
| Number of Transceivers | 2 | |
| Product Type | USB Bridge IC | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 76 | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Length | 9.1mm | |
| Height | 0.95mm | |
| Width | 9.1 mm | |
| Series | FT601Q | |
| Automotive Standard | No | |
| Supply Current | 70mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Maximum Data Rate 5Gbps | ||
Number of Transceivers 2 | ||
Product Type USB Bridge IC | ||
Sub Type Transceiver | ||
USB Specification USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 76 | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Length 9.1mm | ||
Height 0.95mm | ||
Width 9.1 mm | ||
Series FT601Q | ||
Automotive Standard No | ||
Supply Current 70mA | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Gerelateerde Links
- FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN
- FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- FTDI Chip FT600Q-B-T, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- FTDI Chip, Controller IC, 1-Channel 480 Mbps, 3.6 V, USB, 3.3 V, 76-Pin QFN
- FTDI Chip FT602Q-B-T, Controller IC, 1-Channel 480 Mbps, 3.6 V, USB, 3.3 V, 76-Pin QFN
- FTDI Chip FTDI USB-KEY
- FTDI Chip, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN
- FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN