FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- RS-stocknr.:
- 146-6835
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Subtotaal (1 tray van 260 eenheden)*
€ 1.908,92
(excl. BTW)
€ 2.309,84
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk | Per tray* |
|---|---|---|
| 260 + | € 7,342 | € 1.908,92 |
*prijsindicatie
- RS-stocknr.:
- 146-6835
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Product Type | USB Bridge IC | |
| Number of Transceivers | 2 | |
| Maximum Data Rate | 5Gbps | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 7.1mm | |
| Standards/Approvals | RoHS | |
| Width | 7.1 mm | |
| Series | FT600Q | |
| Height | 0.69mm | |
| Automotive Standard | No | |
| Supply Current | 70mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Product Type USB Bridge IC | ||
Number of Transceivers 2 | ||
Maximum Data Rate 5Gbps | ||
Sub Type Transceiver | ||
USB Specification USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 56 | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 7.1mm | ||
Standards/Approvals RoHS | ||
Width 7.1 mm | ||
Series FT600Q | ||
Height 0.69mm | ||
Automotive Standard No | ||
Supply Current 70mA | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Gerelateerde Links
- FTDI Chip FT600Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 56-Pin QFN
- FTDI Chip FT601Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 76-Pin QFN
- FTDI Chip FT232HPQ-TRAY, USB Controller, 12Mbps, USB 2.0, 3.3 V, 56-Pin QFN 56
- FTDI Chip FT240XQ-T, USB Controller, USB 2.0, 5.5 V, 24-Pin QFN
- FTDI Chip FT231XQ-T, USB Controller, USB 2.0, 5.5 V, 20-Pin QFN
- FTDI Chip FT602Q-B-T, USB Controller, 480Mbps, USB, 3.3 V, 76-Pin QFN
- FTDI Chip FT232RQ-TRAY, USB Controller, USB 2.0, 6 V, 32-Pin QFN-EP
- FTDI Chip FT311D-32Q1C-R, USB Controller, USB 1.1, USB 2.0, 3.3 V, 32-Pin QFN