EVENTUS Threading Tap HSS-G 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- RS-stocknr.:
- 509-0367
- Fabrikantnummer:
- 10353
- Fabrikant:
- EVENTUS
Subtotaal (1 eenheid)*
€ 9,07
(excl. BTW)
€ 10,97
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 9,07 |
*prijsindicatie
- RS-stocknr.:
- 509-0367
- Fabrikantnummer:
- 10353
- Fabrikant:
- EVENTUS
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | EVENTUS | |
| Thread Size | M5 | |
| Set Type | Threading Tap | |
| Type | Spiral Flute | |
| Pitch | 0.8mm | |
| Thread Standard | Metric | |
| Number of Pieces | 1 | |
| Overall Length | 70 mm | |
| Material | HSS-G | |
| Hand/Machine Tap | Machine Tap | |
| Shank Diameter | 6 mm | |
| Alles selecteren | ||
|---|---|---|
Merk EVENTUS | ||
Thread Size M5 | ||
Set Type Threading Tap | ||
Type Spiral Flute | ||
Pitch 0.8mm | ||
Thread Standard Metric | ||
Number of Pieces 1 | ||
Overall Length 70 mm | ||
Material HSS-G | ||
Hand/Machine Tap Machine Tap | ||
Shank Diameter 6 mm | ||
Vrijgesteld
- Land van herkomst:
- CN
Machine Tap, Spiral Flute, Blind Holes
HSS-G machine tap with
35° right-hand spiral flute
For metric ISO thread DIN 13, tolerance 6H
2-pitch point, for blind holes
Reinforced, M12 with fall-through shaft
35° right-hand spiral flute
For metric ISO thread DIN 13, tolerance 6H
2-pitch point, for blind holes
Reinforced, M12 with fall-through shaft
Standards
DIN 371, DIN 376
Gerelateerde Links
- EVENTUS Threading Tap HSS-G 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- EVENTUS Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard M5 Thread
- EVENTUS Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard Hand Tap M5 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-E-PM 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- RS PRO Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard Manual or machine tap M5 Thread