EVENTUS Threading Tap HSS-G 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- RS-stocknr.:
- 508-9783
- Fabrikantnummer:
- 10352
- Fabrikant:
- EVENTUS
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 8,45
(excl. BTW)
€ 10,22
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 45 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 8,45 |
*prijsindicatie
- RS-stocknr.:
- 508-9783
- Fabrikantnummer:
- 10352
- Fabrikant:
- EVENTUS
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | EVENTUS | |
| Thread Size | M4 | |
| Set Type | Threading Tap | |
| Type | Spiral Flute | |
| Pitch | 0.7mm | |
| Thread Standard | Metric | |
| Number of Pieces | 1 | |
| Overall Length | 63 mm | |
| Hand/Machine Tap | Machine Tap | |
| Material | HSS-G | |
| Shank Diameter | 4.5 mm | |
| Alles selecteren | ||
|---|---|---|
Merk EVENTUS | ||
Thread Size M4 | ||
Set Type Threading Tap | ||
Type Spiral Flute | ||
Pitch 0.7mm | ||
Thread Standard Metric | ||
Number of Pieces 1 | ||
Overall Length 63 mm | ||
Hand/Machine Tap Machine Tap | ||
Material HSS-G | ||
Shank Diameter 4.5 mm | ||
Vrijgesteld
- Land van herkomst:
- CN
Machine Tap, Spiral Flute, Blind Holes
HSS-G machine tap with
35° right-hand spiral flute
For metric ISO thread DIN 13, tolerance 6H
2-pitch point, for blind holes
Reinforced, M12 with fall-through shaft
35° right-hand spiral flute
For metric ISO thread DIN 13, tolerance 6H
2-pitch point, for blind holes
Reinforced, M12 with fall-through shaft
Standards
DIN 371, DIN 376
Gerelateerde Links
- EVENTUS Threading Tap HSS-G 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- EVENTUS Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard M4 Thread
- EVENTUS Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard Hand Tap M4 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-E-PM 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- RS PRO Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard Manual or machine tap M4 Thread