Fluke Test Probe, 60V, 2 mm Socket, 10A
- RS-stocknr.:
- 493-3285
- Artikelnummer Distrelec:
- 140-44-269
- Fabrikantnummer:
- TP88
- Fabrikant:
- Fluke
Subtotaal (1 set)*
€ 24,00
(excl. BTW)
€ 29,04
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 203 stuk(s) vanaf 25 mei 2026
- Plus verzending 241 stuk(s) vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Set(s) | Per set |
|---|---|
| 1 + | € 24,00 |
*prijsindicatie
- RS-stocknr.:
- 493-3285
- Artikelnummer Distrelec:
- 140-44-269
- Fabrikantnummer:
- TP88
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Voltage | 60V | |
| Product Type | Test Probe | |
| Current | 10A | |
| Colour | Red, Black | |
| Probe Socket Diameter | 2mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Voltage 60V | ||
Product Type Test Probe | ||
Current 10A | ||
Colour Red, Black | ||
Probe Socket Diameter 2mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- US
Fluke Test Probe, 10A Current, 60V Voltage - TP88
This test probe provides a compact, insulated means to access electrical connectors and wiring within confined assemblies. It is designed to slide onto 2mm test probe sockets and to pass between Seals and multi‑pin connectors for accurate contact in low‑voltage environments.
Features & Benefits
• Rated for 10 A current handling for high‑load probing
• Tested to 60V DC for low‑voltage diagnostic tasks
• Two‑inch rigid back for penetrating tight seals
• Sharp‑point tip for reliable contact with connector pins
• Insulated body to reduce the risk of shorting adjacent conductors
• Tested to 60V DC for low‑voltage diagnostic tasks
• Two‑inch rigid back for penetrating tight seals
• Sharp‑point tip for reliable contact with connector pins
• Insulated body to reduce the risk of shorting adjacent conductors
**Applications**
• Suitable for automotive wiring-harness diagnosis in sealed connectors
• Ideal for servicing control panels in automation equipment
• Used for continuity and live checks on low‑voltage circuits
• Can be used with multimeters and test leads fitted with 2mm sockets
• Ideal for servicing control panels in automation equipment
• Used for continuity and live checks on low‑voltage circuits
• Can be used with multimeters and test leads fitted with 2mm sockets
What socket size is required to use it with test leads?
It accepts probe sockets measuring 2mm diameter and fits standard 2mm test lead terminations.
How does the probe provide protection against unintended contact?
The probe incorporates insulation around the shaft to help prevent electrical contact with neighbouring conductors during probing.
Is the probe available in different colours for easy identification?
It is supplied in red and black variants to assist colour‑coding during measurements.
Will the probe perform when used for higher current checks?
The probe is specified to carry up to 10 A, enabling it to be used for higher current measurement and load checks within that limit.
Gerelateerde Links
- Fluke Test Probe, 1000 V, 10A
- Fluke Test Probe, 600 V, 10A
- Fluke Test Probe, 2 mm Tip, 1 kV, 600 V, 2 mm Socket, 10A
- Fluke Lantern Test Probe, 1000 V, 10A
- Fluke Rounded Test Probe, 600 V, 10A
- Fluke Threaded Test Probe, 2 mm Tip, 1000 V, 10A
- Fluke Sharp Test Probe, 12 mm Tip, 1 kV, 10A
- Fluke Removable Lantern Tips Test Probe, 4 mm Tip, 1 kV, 600 V, 4 mm Socket, 10A