Test Connectors

We stock a wide array of test connectors which can be used for all of your measurement and testing needs. Our range of test connectors, test plugs, clips, probes, and adapters can be used for application in many situations; industrially, scientifically and also for learning or teaching.

What are test connectors and their uses?

Test connectors are used in conjunction with test and measurement equipment such as multimeters, test leads and oscilloscopes so that they can effectively inspect and test for issues. They’re often used to test whether the various components such as cables are being used in the circuit have a connection problem and not a fault with the system or a different component, testing can be done as a part of quality control with a test item from a large stock of product. Test connectors are also used as a standard when testing electrics and there are many different components available. In addition to testing for quality control, the development side contains a significant amount of testing. Devices are continuously tested for safety and durability, and to make sure the device is meeting the current, voltage, and resistance requirement.

Our most popular test connector areas include:

  • 4mm test sockets - which can be stacked and linked together to form a complex circuit that is being tested. They're commonly used by electricians to check sockets, although many electricians keep a stock of sizes ranging from 1mm to 6mm.
  • Pneumatic or spring test probes - provide a high spring force and can be used in automated test applications.
  • Crocodile clips - designed to easily clip onto a test lead and connect directly to an electrical component.

Our selection of plugs and sockets allow our connectors to be versatile in their various applications both industrially and domestically.

Related Products
SEB2-F2,8 series 2 mm press-in sockets with a ...
Description:
SEB2-F2,8 series 2 mm press-in sockets with a rigid insulation sleeve for pressing into predrilled panels. These sockets have a 600 V, CAT III / 10 A rating. The sockets are terminated with a 2.8 x 0.8 mm tab terminal ...
Cable lug with shatter-proof, flexible insulating sleeve with ...
Description:
Cable lug with shatter-proof, flexible insulating sleeve with 4mm diameter transverse hole. Contact material Nickel plated brass. Screw connection up to a maximum 2.5mm². For connection to bolts from 4mm to 7mm diameter. Max. cable diameter is 4.2mm.
PKI 110 Hirschmann CAT I, 4mm fully insulated ...
Description:
PKI 110 Hirschmann CAT I, 4mm fully insulated panel mount binding post with 2mm cross hole, offered in black, red and blue, nickel plated brass construction and with a M4 thread terminal. Part of the Hirschmann 4mm test system. Rated ...
SAB 2640 LK, Hirschmann CAT II 4mm safety ...
Description:
SAB 2640 LK, Hirschmann CAT II 4mm safety series contact protected unsprung socket, for 4mm diameter safety test plugs, these panel mounted test connectors offer gold-plated brass contact surfaces with a solder connection. Suitable for installation into switch-panels and equipment ...