RS PRO Test Pin 3A
- RS-stocknr.:
- 542-4984
- Artikelnummer Distrelec:
- 304-04-730
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 5 eenheden)*
€ 22,55
(excl. BTW)
€ 27,30
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 105 stuk(s) klaar voor verzending
- 375 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 20 | € 4,51 | € 22,55 |
| 25 - 45 | € 4,176 | € 20,88 |
| 50 - 95 | € 3,834 | € 19,17 |
| 100 + | € 3,50 | € 17,50 |
*prijsindicatie
- RS-stocknr.:
- 542-4984
- Artikelnummer Distrelec:
- 304-04-730
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Current Rating | 3A | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Current Rating 3A | ||
RS PRO 2.54 mm Pitch Spring Test Probe With Concave Tip, 3 A
This pack of five spring test probes is part of our tried-and-tested RS PRO range. These probes are made of phosphor bronze and can be used in the testing of PCBs (printed circuit boards). Thanks to their concave tips, the spring-loaded probes are an ideal choice for testing long leads, terminals and wire wrap posts.
To use the probes, you'll need a receptacle, which can be ordered separately. Using separate probes and receptacles makes it easy to replace a damaged probe without disturbing the wiring. And as the probes can be push fitted into the mounting plate, it's possible to achieve an airtight seal without the use of any adhesives.
These test probes are suitable for use on automatic test equipment and test jigs, where fast testing of multipoint PCBs and sub-assemblies is needed.
To use the probes, you'll need a receptacle, which can be ordered separately. Using separate probes and receptacles makes it easy to replace a damaged probe without disturbing the wiring. And as the probes can be push fitted into the mounting plate, it's possible to achieve an airtight seal without the use of any adhesives.
These test probes are suitable for use on automatic test equipment and test jigs, where fast testing of multipoint PCBs and sub-assemblies is needed.
Features and Benefits
• Concave probe tip
• Made of phosphor bronze
• Contact resistance of 30 mΩ
• Pitch of 2.54 mm
• Length of 24.7 mm
• Current rating of 3 A
• Spring pressure of 1.47 N(g)
• Made of phosphor bronze
• Contact resistance of 30 mΩ
• Pitch of 2.54 mm
• Length of 24.7 mm
• Current rating of 3 A
• Spring pressure of 1.47 N(g)
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.