Subtotaal (1 verpakking van 200 eenheden)*
€ 423,00
(excl. BTW)
€ 511,80
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 600 stuk(s) vanaf 14 januari 2026
- Plus verzending 400 stuk(s) vanaf 04 maart 2026
- Plus verzending 600 stuk(s) vanaf 01 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 200 + | € 2,115 | € 423,00 |
*prijsindicatie
- RS-stocknr.:
- 190-3397
- Fabrikantnummer:
- P1113CA3
- Fabrikant:
- HARWIN
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | HARWIN | |
| Current Rating | 2A | |
| Alles selecteren | ||
|---|---|---|
Merk HARWIN | ||
Current Rating 2A | ||
Vrijgesteld
Spring loaded Test Terminals
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.
Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.
Stock No. 521-601 has a gold-plated brass concave probe for locating PCB pins and solder joints.
Stock No. 521-611 has a nickel plated carbon-steel pointed probe for making contact to flat track and pads.
Probe is housed in a gold-plated brass body with a gold plated spring steel spring.
Solder posts connection to terminals
Recommended test-bed thickness: 5mm min. (epoxy bonded) 12mm max., (press fit)
15 mm max.
Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.
Stock No. 521-601 has a gold-plated brass concave probe for locating PCB pins and solder joints.
Stock No. 521-611 has a nickel plated carbon-steel pointed probe for making contact to flat track and pads.
Probe is housed in a gold-plated brass body with a gold plated spring steel spring.
Solder posts connection to terminals
Recommended test-bed thickness: 5mm min. (epoxy bonded) 12mm max., (press fit)
15 mm max.