RS PRO Stepper Motor 2.8V, 0.36Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS-stocknr.:
- 892-8732
- Artikelnummer Distrelec:
- 304-19-920
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 42,07
(excl. BTW)
€ 50,90
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 23 stuk(s) klaar voor verzending
- 144 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 42,07 |
*prijsindicatie
- RS-stocknr.:
- 892-8732
- Artikelnummer Distrelec:
- 304-19-920
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Stepper Motor | |
| Step Angle | 1.8° | |
| Holding Torque | 0.36Nm | |
| Voltage | 2.8V | |
| Frame Size | 42.3 x 42.3 mm | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.68A | |
| Winding Arrangement | Bipolar, Unipolar | |
| Shaft Length | 22mm | |
| IP Rating | IP54, IP65 | |
| Number of Pole Pairs | 1 | |
| Depth | 62mm | |
| Resistance Per Phase | 1.65Ω | |
| Standards/Approvals | CE, RoHS Compliant | |
| Output Speed | 186rpm | |
| Detent Torque | 25mNm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Stepper Motor | ||
Step Angle 1.8° | ||
Holding Torque 0.36Nm | ||
Voltage 2.8V | ||
Frame Size 42.3 x 42.3 mm | ||
Shaft Diameter 5mm | ||
Current Rating 1.68A | ||
Winding Arrangement Bipolar, Unipolar | ||
Shaft Length 22mm | ||
IP Rating IP54, IP65 | ||
Number of Pole Pairs 1 | ||
Depth 62mm | ||
Resistance Per Phase 1.65Ω | ||
Standards/Approvals CE, RoHS Compliant | ||
Output Speed 186rpm | ||
Detent Torque 25mNm | ||
- Land van herkomst:
- CN
RS PRO Hybrid Stepper Motor 1.8°, 0.36 Nm, 2.8 V, 1.68 A, 4 Wires
Hybrid stepper motors are brushless assembles typically used to divide a full motor rotation into several smaller, equal steps. This delivers greater precision and higher efficiency at lower speeds and lets you make accurate and controlled movements with electric devices. A hybrid stepper uses a combination of permanent magnet and variable reluctance motor technology to make the most of power in small devices.
The motor is RoHS (Restriction of Hazardous Substances) compliant, which means it doesn't contain harmful levels of any hazardous materials. Like all RS PRO products, it's been thoroughly tested to give you confidence in its quality.
Commonly found in lasers, these motors can form part of larger, complex devices such as linear actuators and rotation stages. You'll find them around the home in everything from camera lenses to DVD players.
Features and Benefits
• Step angle of 1.8°
• Holding torque of 0.36 Nm
• Four-wire bipolar winding
• Voltage rating of 2.8 V
• Frame size of 42.3 x 42.3 mm
• Hybrid stepper motor type with permanent magnet
• Current rating of 1.68 A
• Depth of 62 mm
• Resistance per phase of 1.65 Ω
• RoHS (Restriction of Hazardous Substances) compliant product
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Gerelateerde Links
- RS PRO Stepper Motor 2.8V, 0.44Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS PRO Stepper Motor 2.8V, 0.22Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS PRO Stepper Motor 2.8V, 2.2mNm Torque, 0.9 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS PRO Hybrid Stepper Motor 2.8V, 0.44Nm Torque, 0.9 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS PRO Hybrid Stepper Motor 9.6V, 0.158Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- RS PRO Hybrid Stepper Motor 12V, 0.158Nm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- Trinamic QSH4218 Series Stepper Motor Stepper Motor 1.4V, 400mNm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- Trinamic QSH4218 Series Stepper Motor Stepper Motor 4.5V, 350mNm Torque, 1.8 °, 42.3 x 42.3 mm Frame, 5 mm Shaft