RS PRO Hybrid, Permanent Magnet Stepper Motor, 2.2mNm Torque, 2.8 V, 0.9°, 42.3 x 42.3mm Frame, 5mm Shaft

Bekijk alle Stepper Motors

Subtotaal (1 eenheid)*

€ 56,32

(excl. BTW)

€ 68,15

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 64 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 56,32

*prijsindicatie

RS-stocknr.:
535-0372
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Stepper Motor Type

Hybrid, Permanent Magnet

Step Angle

0.9°

Holding Torque

2.2mNm

Number Of Wires

4

Supply Voltage

2.8 V

Frame Size

42.3 x 42.3mm

Shaft Diameter

5mm

Current Rating

1.33 A

Shaft Length

22mm

Depth

33mm

Resistance Per Phase

2.1Ω

Standards Met

RoHS Compliant

Land van herkomst:
CN

RS PRO Hybrid, Permanent Magnet Stepper Motor, 2.8 V, 1.33 A, 4 Wire


The RS PRO hybrid stepper motor is ideal for making precise and controlled movements with electric devices. Offering high precision and efficiency at lower speeds, stepper motors are brushless assemblies that divide a full motor rotation into several smaller, equal steps. This type of hybrid stepper model benefits from both permanent magnet and variable reluctance motor technologies and is used to maximise power in small devices.

Why Would You Choose This Stepper Motor?


The motor has been tested by engineers for durability and consistency to earn it the RS PRO seal of approval. For peace of mind, it's RoHS (Restriction of Hazardous Substances) compliant, so doesn't contain harmful levels of toxic materials, such as lead.

Features and Benefits


  • Step angle: 0.9°

  • Holding torque: 0.22 Nm

  • Four-wire bipolar winding

  • Voltage rating: 2.8 V

  • Frame size: 42.3 x 42.3 mm

  • Stepper motor type: Hybrid, Permanent Magnet

  • Current rating: 1.33 A

  • Depth: 33 mm

  • Resistance per phase: 2.1 Ω

  • RoHS

Typical Applications


Hybrid stepper motors are often found in lasers and optics applications, as part of complex devices such as linear actuators and goniometers. They can be used in a variety of commercial applications – you'll find them in everything from camera lenses and DVD players to 3D printers


0.9° and 1.8° Hybrid Stepper Motors


1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:


Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters

Gerelateerde Links