Festo EMMT Series Servo Motor Stepper Motor 48V, 0.63Nm Torque, 1.8 °, 42 mm Frame

RS-stocknr.:: 827-242
Fabrikantnummer:: EMMT-ST-42-L-RSB
Fabrikant:: Festo

Festo EMMT Series Servo Motor Stepper Motor 48V, 0.63Nm Torque, 1.8 °, 42 mm Frame

Subtotaal (1 eenheid)*

€ 418,16

(excl. BTW)

€ 505,97

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 30 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 418,16

*prijsindicatie

RS-stocknr.:: 827-242
Fabrikantnummer:: EMMT-ST-42-L-RSB
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Sub Type	Servo Motor
	Product Type	Stepper Motor
	Step Angle	1.8°
	Holding Torque	0.63Nm
	Voltage	48V
	Frame Size	42 mm
	Current Rating	3.4A
	IP Rating	IP40, IP65
	Number of Pole Pairs	50
	Resistance Per Phase	0.6Ω
	Standards/Approvals	cULus, EU RoHS, RCM, UL E342973
	Output Speed	3200rpm
	Detent Torque	0.63nm
	Series	EMMT

	Alles selecteren
	Merk Festo
	Sub Type Servo Motor
	Product Type Stepper Motor
	Step Angle 1.8°
	Holding Torque 0.63Nm
	Voltage 48V
	Frame Size 42 mm
	Current Rating 3.4A
	IP Rating IP40, IP65
	Number of Pole Pairs 50
	Resistance Per Phase 0.6Ω
	Standards/Approvals cULus, EU RoHS, RCM, UL E342973
	Output Speed 3200rpm
	Detent Torque 0.63nm
	Series EMMT

Land van herkomst:: BG

Festo EMMT-ST Series Stepper Motor, 0.63Nm Holding Torque, 48V Nominal Operating Voltage - EMMT-ST-42-L-RSB, Numeric Part Number: 8156171

This stepper motor is a Compact industrial servo‑subtype actuator designed for precise position control in automation systems. It operates from a 48V supply and provides a 1.8° step angle for incremental motion tasks. The unit incorporates an absolute single‑turn rotor position encoder with BiSS‑C Interface for accurate feedback and can be mounted in any orientation. It is intended for use in environments requiring moderate ingress protection and vibration and shock resilience.

Features and Benefits:

• 0.63Nm holding torque delivers secure load retention during stops
• 1.8° step angle enables accurate incremental positioning
• 3.4A nominal current supports sustained torque output
• 3200rpm max output speed allows high‑speed indexing
• IP65 housing protection resists water ingress at enclosure level

Applications

• Suitable for pick‑and‑place automation with position feedback
• Ideal for rotary indexing tables in assembly lines
• Used with motion controllers for conveyor synchronisation
• Can be used for laboratory automation requiring precise steps
• Suitable for transport‑grade equipment exposed to vibration

What encoder resolution is available for position measurement?

The absolute encoder provides 16‑bit resolution with 65,536 position values per revolution and magnetic sensing.

How does the brake operate electrically and mechanically?

The integral holding brake runs at 24V DC, consumes 0.34A, closes within ≤41ms and releases within ≤28ms.

What thermal and ambient limits apply to continuous operation?

Rated for ambient -15°C…40°C with storage -20°C…70°C, and windings maximum temperature 130°C

derating applies above 40°C at -2%/°C.

What are the electrical winding characteristics relevant to drive design?

Phase resistance is 0.6Ω, phase inductance 0.8mH, voltage constant 10.6mVmin and motor constant 0.162Nm/A.

What mechanical load capacities should be observed on the shaft?

Permissible axial shaft load is 10N and radial shaft load is 28N for reliable operation.