Festo EMMT Series Hybrid Stepper Motor 48V, 6.6Nm Torque, 1.8 °, 87 mm Frame, 14 mm Shaft

RS-stocknr.:: 827-233
Fabrikantnummer:: EMMT-ST-87-M-RSB
Fabrikant:: Festo

Festo EMMT Series Hybrid Stepper Motor 48V, 6.6Nm Torque, 1.8 °, 87 mm Frame, 14 mm Shaft

Subtotaal (1 eenheid)*

€ 587,32

(excl. BTW)

€ 710,66

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 30 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 587,32

*prijsindicatie

RS-stocknr.:: 827-233
Fabrikantnummer:: EMMT-ST-87-M-RSB
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Stepper Motor
	Sub Type	Hybrid
	Step Angle	1.8°
	Holding Torque	6.6Nm
	Voltage	48V
	Mount Type	Any Position
	Frame Size	87 mm
	Shaft Diameter	14mm
	Current Rating	7.5A
	Winding Arrangement	Bipolar
	Shaft Length	30mm
	IP Rating	IP65
	Number of Pole Pairs	50
	Width	87mm
	Resistance Per Phase	0.27Ω
	Depth	87mm
	Length	121mm
	Standards/Approvals	CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Output Speed	140rpm
	Series	EMMT
	Detent Torque	6.6nm

	Alles selecteren
	Merk Festo
	Product Type Stepper Motor
	Sub Type Hybrid
	Step Angle 1.8°
	Holding Torque 6.6Nm
	Voltage 48V
	Mount Type Any Position
	Frame Size 87 mm
	Shaft Diameter 14mm
	Current Rating 7.5A
	Winding Arrangement Bipolar
	Shaft Length 30mm
	IP Rating IP65
	Number of Pole Pairs 50
	Width 87mm
	Resistance Per Phase 0.27Ω
	Depth 87mm
	Length 121mm
	Standards/Approvals CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Output Speed 140rpm
	Series EMMT
	Detent Torque 6.6nm

Land van herkomst:: BG

Festo EMMT Series Stepper Motor, 48V Voltage, 6.6Nm Holding Torque - EMMT-ST-87-M-RSB, Numeric Part Number: 8156195

This stepper motor is designed to provide precise rotational positioning for motion-control systems, delivering measured torque and controlled speed in varied mounting orientations. It operates at 48V and is constructed for protection against ingress, making it suitable for environments where dust or moisture may be present. The unit achieves incremental movement with fine angular resolution and is intended for applications requiring repeatable step-wise motion.

Features and Benefits:

• 1.8° step angle for accurate incremental positioning
• 50 pole pairs delivering increased torque density
• 7.5A current rating enabling sustained electromagnetic force
• 140rpm output speed for moderate-speed motion tasks
• 0.27Ω resistance per phase reducing Coil voltage drop

Applications

• Suitable for CNC table indexing tasks
• Ideal for automated picking and placing systems
• Used with rotary stages requiring repeatable steps
• Can be used for conveyor positioning modules
• Suitable for robotics joint actuation requiring torque

What shaft Interface dimensions should I prepare for installation?

The motor uses a 14mm shaft diameter with a 30mm exposed length for coupling alignment.

How should the motor be oriented when mounting?

It can be installed in any position to suit mechanical layouts without performance loss.

What ingress protection level does it offer for harsh environments?

The enclosure is rated IP65, providing protection against dust ingress and low-pressure water jets.

What electrical characteristic affects phase heating during operation?

Each phase presents 0.27 Ω resistance which influences I2R losses and temperature rise.

What certifications confirm conformity to recognised standards?

It carries CE, RoHS, cULus and UL E342973 approvals and meets IEC 60034 and RCM requirements.