EXACT HSS Cone Cutter 5mm x 20mm
- RS-stocknr.:
- 611-5934
- Fabrikantnummer:
- 05285
- Fabrikant:
- EXACT
Subtotaal (1 eenheid)*
€ 59,64
(excl. BTW)
€ 72,16
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 2 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 59,64 |
*prijsindicatie
- RS-stocknr.:
- 611-5934
- Fabrikantnummer:
- 05285
- Fabrikant:
- EXACT
Specificaties
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | EXACT | |
| Drill Bit Type | Cone Cutter | |
| Material | HSS | |
| Minimum Head Size | 5mm | |
| Maximum Head Size | 20mm | |
| Alles selecteren | ||
|---|---|---|
Merk EXACT | ||
Drill Bit Type Cone Cutter | ||
Material HSS | ||
Minimum Head Size 5mm | ||
Maximum Head Size 20mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Sheet metal hole cutter, spiral tap, TiAlN
HSS hole cutter with spiral tap
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-302 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm