IXYS Solid State Relay, 9.4 A rms Load, PCB Mount
- RS-stocknr.:
- 906-1108
- Fabrikantnummer:
- CPC1988J
- Fabrikant:
- IXYS
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 24,11
(excl. BTW)
€ 29,17
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 25 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 99 | € 24,11 |
| 100 + | € 20,50 |
*prijsindicatie
- RS-stocknr.:
- 906-1108
- Fabrikantnummer:
- CPC1988J
- Fabrikant:
- IXYS
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | IXYS | |
| Maximum Load Current | 9.4 A rms | |
| Mounting Type | PCB Mount | |
| Switching Type | DC | |
| Number of Poles | 1 | |
| Contact Configuration | SPST | |
| Terminal Type | PCB Pin | |
| Output Device | MOSFET | |
| Relay Type | Power Relay | |
| Package Style | ISO Plus-264 | |
| Maximum Turn On Time | 20ms | |
| Dimensions | 19.914 x 5.029 x 26.162mm | |
| Maximum Operating Temperature | +85°C | |
| Capacitance | 540pF | |
| Special Features | Arc-Free With No Snubbing Circuits, High Reliability, Low Drive Power Requirement, Machine Insertable, No EMI/RFI Generation, Wave Solderable | |
| Standards Met | UL 508 Approved File No E69938 | |
| Operating Temperature Range | -40 → +85°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 19.9mm | |
| Height | 26.2mm | |
| Off State Leakage Current | 1 μA | |
| Depth | 5mm | |
| Alles selecteren | ||
|---|---|---|
Merk IXYS | ||
Maximum Load Current 9.4 A rms | ||
Mounting Type PCB Mount | ||
Switching Type DC | ||
Number of Poles 1 | ||
Contact Configuration SPST | ||
Terminal Type PCB Pin | ||
Output Device MOSFET | ||
Relay Type Power Relay | ||
Package Style ISO Plus-264 | ||
Maximum Turn On Time 20ms | ||
Dimensions 19.914 x 5.029 x 26.162mm | ||
Maximum Operating Temperature +85°C | ||
Capacitance 540pF | ||
Special Features Arc-Free With No Snubbing Circuits, High Reliability, Low Drive Power Requirement, Machine Insertable, No EMI/RFI Generation, Wave Solderable | ||
Standards Met UL 508 Approved File No E69938 | ||
Operating Temperature Range -40 → +85°C | ||
Minimum Operating Temperature -40°C | ||
Length 19.9mm | ||
Height 26.2mm | ||
Off State Leakage Current 1 μA | ||
Depth 5mm | ||
- Land van herkomst:
- PH
1-Form-A OptoMOS Power Relay, CPC
These single pole solid state relays have normally open (1-Form-A) contacts. They feature a unique ISOPLUS-264 package giving the highest possible load current and power ratings. They are able to provide 2500 Vrms of input to output isolation by utilising optically coupled MOSFET technology.
The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.
The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.
Potential Applications:
Industrial controls/motor control
Robotics
Medical equipment: Patient/equipment isolation
Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems
Energy meters
Transportation equipment
Aerospace/defence
The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.
The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.
Potential Applications:
Industrial controls/motor control
Robotics
Medical equipment: Patient/equipment isolation
Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems
Energy meters
Transportation equipment
Aerospace/defence
Features
2.25 Arms load current with 5°C per watt heat sink
Low on-resistance
Selection of blocking voltages
2500 Vrms input/output isolation
Low thermal resistance
Isolated, low thermal impedance ceramic pad for heat sink applications
Low drive power requirements
Arc-free with no snubbing circuits
No EMI/RFI generation
Machine insertable, wave solderable
2.25 Arms load current with 5°C per watt heat sink
Low on-resistance
Selection of blocking voltages
2500 Vrms input/output isolation
Low thermal resistance
Isolated, low thermal impedance ceramic pad for heat sink applications
Low drive power requirements
Arc-free with no snubbing circuits
No EMI/RFI generation
Machine insertable, wave solderable
Standards
UL 508 Certified Component: File E69938
Ixys Solid State Relays, PCB Mount
Gerelateerde Links
- IXYS Solid State Relay, 40 A rms Load, PCB Mount, 280 V rms ac Control
- IXYS Solid State Relay, 3 A rms Load, PCB Mount, 240 V ac Load, 1.4 V Control
- IXYS Solid State Relay, 1.5 A rms/A dc, 2.5 A dc Load, Surface Mount
- Sensata Crydom Solid State Relay, 1.5 A rms Load, PCB Mount, 280 V rms Load
- IXYS Solid State Relay, 15 A Load, PCB Mount
- IXYS Solid State Relay, 2.7 A Load, PCB Mount
- IXYS Solid State Relay, 14.5 A Load, PCB Mount
- Sensata Crydom Solid State Relay, 25 A rms Load, PCB Mount, 280 V rms Load, 36 V rms Control