IXYS Solid State Relay, 2.7 A Load, PCB Mount

Bekijk alle Solid State Relays
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 17,76

(excl. BTW)

€ 21,49

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 159 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 9€ 17,76
10 - 24€ 15,37
25 +€ 14,21

*prijsindicatie

RS-stocknr.:
906-1085
Fabrikantnummer:
CPC1927J
Fabrikant:
IXYS
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

IXYS

Maximum Load Current

2.7 A

Mounting Type

PCB Mount

Switching Type

DC

Number of Poles

1

Terminal Type

PCB Pin

Contact Configuration

SPST

Output Device

MOSFET

Package Style

ISO Plus-264

Relay Type

Power Relay

Maximum Turn On Time

25ms

Dimensions

19.914 x 5.029 x 26.162mm

Maximum Operating Temperature

+85°C

Height

26.2mm

Special Features

Arc-Free With No Snubbing Circuits, High Reliability, Low Drive Power Requirement, Machine Insertable, No EMI/RFI Generation, Wave Solderable

Operating Temperature Range

-40 → +85°C

Length

19.9mm

Off State Leakage Current

1 μA

Capacitance

1.1nF

Minimum Operating Temperature

-40°C

Standards Met

UL 508 Approved File No E69938

Depth

5mm

Land van herkomst:
PH

1-Form-A OptoMOS Power Relay, CPC


These single pole solid state relays have normally open (1-Form-A) contacts. They feature a unique ISOPLUS-264 package giving the highest possible load current and power ratings. They are able to provide 2500 Vrms of input to output isolation by utilising optically coupled MOSFET technology.

The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.

The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.

Potential Applications:
Industrial controls/motor control
Robotics
Medical equipment: Patient/equipment isolation
Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems
Energy meters
Transportation equipment
Aerospace/defence

Features
2.25 Arms load current with 5°C per watt heat sink
Low on-resistance
Selection of blocking voltages
2500 Vrms input/output isolation
Low thermal resistance
Isolated, low thermal impedance ceramic pad for heat sink applications
Low drive power requirements
Arc-free with no snubbing circuits
No EMI/RFI generation
Machine insertable, wave solderable

Standards

UL 508 Certified Component: File E69938


Ixys Solid State Relays, PCB Mount

Gerelateerde Links