Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Screw
- RS-stocknr.:
- 271-1885
- Fabrikantnummer:
- G3RV-ST700-A 12VDC
- Fabrikant:
- Omron
Subtotaal (1 eenheid)*
€ 51,31
(excl. BTW)
€ 62,09
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 20 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 51,31 |
*prijsindicatie
- RS-stocknr.:
- 271-1885
- Fabrikantnummer:
- G3RV-ST700-A 12VDC
- Fabrikant:
- Omron
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Omron | |
| Maximum Control Voltage | 12V dc | |
| Alles selecteren | ||
|---|---|---|
Merk Omron | ||
Maximum Control Voltage 12V dc | ||
- Land van herkomst:
- JP
Omron G3RV-ST Series Solid State Interface Relay, 2500V Isolation Voltage, 12VDC Input Voltage - G3RV-ST700-A 12VDC
This solid-state Interface relay provides Compact electrical isolation and switching for automation systems, enabling clean interfacing between PLC outputs and power circuits. Designed for DIN-rail mounting, it suits control panels where space is limited and consistent input signalling is required. An LED indicates input status to assist commissioning and diagnostics.
Features and Benefits:
• Isolation voltage 2500V for safer control-to-load separation • 12V DC input requiring only 15 mA for low-drive demands • Rise time 11 MS to limit inrush and reduce contact stress • Screw-terminal configuration for secure wiring connections • Wide ambient range -30°C to 55°C for varied site conditions • Standards approvals EN 62314, UL508, IEC 60529, CSA C22.2 No.14 supporting industrial use
Applications
• Suitable for PLC output isolation and signal conditioning in control cabinets • Ideal for retrofit of relay panels requiring DIN-rail solid-state relay 6.2mm screw-terminal footprint • Used with motor starter logic to provide noise-resistant switching • Can be used for indicator and alarm circuit interfacing with LED feedback
What mounting method is provided for panel installation?
It attaches to a DIN rail, enabling fast installation and straightforward replacement during maintenance.
How is input status verified on-site?
An integrated LED displays input activation, allowing Visual confirmation without test equipment.
How does it perform in electrically noisy environments?
The device offers 2500V isolation between control and load, helping to prevent interference propagation.
Which wiring approach is required for secure connections?
Terminals use screw-type clamps to ensure firm conductor retention suitable for industrial cabling.
What approvals indicate suitability for industrial applications?
It meets EN 62314, UL508, IEC 60529 and CSA C22.2 No.14 standards for relevant industrial requirements.
Gerelateerde Links
- Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Screw
- Omron G3RV-ST Solid State Interface Relay 264 V, Control:12V dc DIN Rail Screw
- Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Push-in
- Omron G3RV-ST Solid State Interface Relay 264 V, Control:12V dc DIN Rail Push-in
- Omron G3RV-ST Solid State Interface Relay, Control:110V ac DIN Rail Screw
- Omron G3RV-ST Solid State Interface Relay, Control:24V dc DIN Rail Screw
- Omron G3RV-ST Solid State Interface Relay, Control:230V ac DIN Rail Screw
- Omron G3RV-ST Solid State Interface Relay, Control:48V ac/dc DIN Rail Screw