SKF Nitrile Rubber (NBR) Radial Shaft Seal, 180 mm ID, 210 mm OD, 15 mm

RS-stocknr.:: 266-9007
Fabrikantnummer:: 180X210X15 HMSA10 RG
Fabrikant:: SKF

SKF Nitrile Rubber (NBR) Radial Shaft Seal, 180 mm ID, 210 mm OD, 15 mm

Bekijk alle Seals

Subtotaal (1 eenheid)*

€ 21,85

(excl. BTW)

€ 26,44

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 21,85

*prijsindicatie

RS-stocknr.:: 266-9007
Fabrikantnummer:: 180X210X15 HMSA10 RG
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Radial Shaft Seal
	Inside Diameter	180mm
	Outside Diameter	210mm
	Seal Type	Rotary Shaft Seal
	Thickness	15mm
	Seal Material	Nitrile Rubber (NBR)

Datasheet - 180X210X15 HMSA10 RG

Land van herkomst:: CN

SKF Radial Shaft Seal, 180mm Inside Diameter, 210mm Outside Diameter - 180X210X15 HMSA10 RG

This radial shaft seal is designed to prevent fluid leakage and exclude contaminants in rotating equipment where a snug shaft Interface is required. It is manufactured from nitrile rubber and intended for rotary applications, offering a resilient sealing lip to sustain continuous shaft motion in industrial environments.

Features and Benefits:

• Nitrile rubber construction resists oil exposure
• Rotary design maintains dynamic shaft contact
• Robust lip geometry reduces ingress of debris
• Consistent sealing under rotational movement
• Withstands routine mechanical wear in service

Applications

• Suitable for pumps with rotating shafts
• Used with gearboxes requiring oil retention
• Ideal for industrial motor shaft protection
• Can be used for compressor shaft sealing

What shaft size must be used for correct installation?

The seal is specified for a shaft with an internal diameter of 180 mm.

What external housing bore is required to fit this component?

The outer diameter for press-fitting is 210 mm.

How thick is the sealing element for axial space planning?

The radial profile requires 15 mm of axial installation clearance.

What elastomer material composes the primary sealing lip?

The lip is formed from nitrile rubber, chosen for its oil-resistant properties.