SKF 33216 Taper 80 mm ID Roller Bearing, 140 mm OD
- RS-stocknr.:
- 208-0186
- Fabrikantnummer:
- 33216
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 203,97
(excl. BTW)
€ 246,80
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 203,97 |
*prijsindicatie
- RS-stocknr.:
- 208-0186
- Fabrikantnummer:
- 33216
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Cup Width | 35mm | |
| Number of Rows | 1 | |
| Cone Width | 46mm | |
| Outside Diameter | 140mm | |
| Static Load Rating | 375kN | |
| Limiting Speed | 4500rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 308kN | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Cup Width 35mm | ||
Number of Rows 1 | ||
Cone Width 46mm | ||
Outside Diameter 140mm | ||
Static Load Rating 375kN | ||
Limiting Speed 4500rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 308kN | ||
End Type Shielded | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 33216 Taper Roller 80 mm ID Tapered Roller Bearing, 140 mm OD
- SKF 32216 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF C 2216 K Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF C 2216/C3 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD
- NTN 30216U Taper Roller 80 mm ID Roller Bearing, 140 mm OD
- NTN 33216U Taper Roller 80 mm ID Roller Bearing, 140 mm OD
- NTN 32216U Taper Roller 80 mm ID Roller Bearing, 140 mm OD