SKF C 2216/C3 Taper 80 mm ID Roller Bearing, 140 mm OD
- RS-stocknr.:
- 208-0155
- Fabrikantnummer:
- C 2216/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 641,70
(excl. BTW)
€ 776,46
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 641,70 |
*prijsindicatie
- RS-stocknr.:
- 208-0155
- Fabrikantnummer:
- C 2216/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Cone Width | 33mm | |
| Limiting Speed | 6000rpm | |
| Series | C 2216 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 220kN | |
| End Type | Sealed | |
| Outside Diameter | 140mm | |
| Static Load Rating | 250kN | |
| Cup Width | 33mm | |
| Internal Clearance | Radial | |
| Number of Rows | 1 | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Cone Width 33mm | ||
Limiting Speed 6000rpm | ||
Series C 2216 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 220kN | ||
End Type Sealed | ||
Outside Diameter 140mm | ||
Static Load Rating 250kN | ||
Cup Width 33mm | ||
Internal Clearance Radial | ||
Number of Rows 1 | ||
Bearing Type Taper | ||
- Land van herkomst:
- SE
The SKF CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles. They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.
Accommodate misalignment
CARB bearings are self-aligning like spherical roller bearings or self-aligning ball bearings.
Accommodate axial displacement
CARB bearings compensate for thermal expansion of the shaft like cylindrical or needle roller bearings .
Wide assortment of dimension series
CARB bearings are available with the same boundary dimensions as corresponding spherical roller bearings, self-aligning ball bearings, cylindrical roller bearings and needle roller bearings.
Long service life
The special roller profile prevents stress peaks at the roller ends.
Low friction
Self-guiding rollers keep friction and frictional heat at low levels.
Improved wear resistance
All CARB bearings are upgraded SKF Explorer bearings.
Low noise
Gerelateerde Links
- SKF NU 2216 ECP/C3 80 mm ID Roller Bearing, 140 mm OD
- SKF NU 2216 ECJ/C3 80 mm ID Roller Bearing, 140 mm OD
- SKF C 2216 K Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF NJ 2216 ECP/C3 80 mm ID Cylindrical Roller Bearing, 140 mm OD
- SKF NU 2216 ECP 80 mm ID Roller Bearing, 140 mm OD
- SKF NJ 2216 ECP 80 mm ID Roller Bearing, 140 mm OD
- SKF NJ 2216 ECJ 80 mm ID Roller Bearing, 140 mm OD
- SKF NU 2216 ECML/P63 80 mm ID Roller Bearing, 140 mm OD