SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- RS-stocknr.:
- 208-0182
- Fabrikantnummer:
- 31311 J2/Q
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 163,95
(excl. BTW)
€ 198,38
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 01 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 163,95 |
*prijsindicatie
- RS-stocknr.:
- 208-0182
- Fabrikantnummer:
- 31311 J2/Q
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Outside Diameter | 120mm | |
| Cup Width | 21mm | |
| Static Load Rating | 137kN | |
| Number of Rows | 1 | |
| Cone Width | 31.5mm | |
| Limiting Speed | 5600rpm | |
| Series | 7FB | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 149kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Outside Diameter 120mm | ||
Cup Width 21mm | ||
Static Load Rating 137kN | ||
Number of Rows 1 | ||
Cone Width 31.5mm | ||
Limiting Speed 5600rpm | ||
Series 7FB | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 149kN | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32211 J2/Q Taper 55 mm ID Roller Bearing, 100 mm OD
- FAG 31311-A Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 30204 J2/Q Taper 20 mm ID Roller Bearing, 47 mm OD
- SKF 30207 J2/Q Taper 35 mm ID Roller Bearing, 72 mm OD
- SKF 30205 J2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 32307 J2/Q Taper 35 mm ID Roller Bearing, 80 mm OD
- SKF 32214 J2/Q Taper 70 mm ID Roller Bearing, 125 mm OD