FAG 31311-A Taper 55 mm ID Roller Bearing, 120 mm OD
- RS-stocknr.:
- 190-8366
- Fabrikantnummer:
- 31311-A
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 126,24
(excl. BTW)
€ 152,75
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 126,24 |
| 5 - 9 | € 122,69 |
| 10 - 24 | € 119,41 |
| 25 + | € 116,26 |
*prijsindicatie
- RS-stocknr.:
- 190-8366
- Fabrikantnummer:
- 31311-A
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Cone Width | 31.5mm | |
| Static Load Rating | 139kN | |
| Outside Diameter | 120 mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 123 KN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Cone Width 31.5mm | ||
Static Load Rating 139kN | ||
Outside Diameter 120 mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 123 KN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Gerelateerde Links
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG 22311-E1-XL-K Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG JK0S030 Taper Roller 30 mm ID Roller Bearing, 55 mm OD
- NTN 4T-30311D Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- FAG 33111 Taper Roller 55 mm ID Tapered Roller Bearing, 95 mm OD
- FAG 32211-A Taper Roller 55 mm ID Roller Bearing, 110 mm OD
- FAG 33114 Taper Roller 70 mm ID Roller Bearing, 120 mm OD