INA HK1414-RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- RS-stocknr.:
- 191-3811
- Fabrikantnummer:
- HK1414-RS-L271
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 9,59
(excl. BTW)
€ 11,60
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 7 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 9,59 |
| 5 - 9 | € 9,22 |
| 10 - 24 | € 9,00 |
| 25 + | € 8,82 |
*prijsindicatie
- RS-stocknr.:
- 191-3811
- Fabrikantnummer:
- HK1414-RS-L271
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 14mm | |
| Race Width | 14mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Static Load Rating | 8.5kN | |
| Dynamic Load Rating | 7.1kN | |
| Outside Diameter | 20mm | |
| End Type | Sealed | |
| Limiting Speed | 10500rpm | |
| Standards/Approvals | DIN 618 | |
| Series | HK-RS | |
| Maximum Speed - Grease | 10500rpm | |
| Bearing Type | Drawn Cup Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 14mm | ||
Race Width 14mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Static Load Rating 8.5kN | ||
Dynamic Load Rating 7.1kN | ||
Outside Diameter 20mm | ||
End Type Sealed | ||
Limiting Speed 10500rpm | ||
Standards/Approvals DIN 618 | ||
Series HK-RS | ||
Maximum Speed - Grease 10500rpm | ||
Bearing Type Drawn Cup Needle | ||
Are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are Pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Gerelateerde Links
- INA HK1416-2RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- INA HK1012-RS-FPM-B-L271 10 mm ID Roller Bearing Drawn Cup Needle, 14 mm OD
- INA HK1214-RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK1514-RS-L271 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD
- INA HK2218-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- INA BK2018-RS-L271 20 mm ID Roller Bearing Drawn Cup Needle, 26 mm OD
- INA HK1216-2RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK3520-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD