INA HK2820-2RS-L271 28 mm ID Roller Bearing Drawn Cup Needle, 35 mm OD

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 14,22

(excl. BTW)

€ 17,21

(incl. BTW)

Op voorraad

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

*prijsindicatie

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

	Alles selecteren
	Merk INA
	Product Type Roller Bearing
	Inside Diameter 28mm
	Race Width 20mm
	Bore Type Parallel
	Cage Material Steel
	Standards/Approvals No
	Dynamic Load Rating 16.4kN
	Outside Diameter 35mm
	Static Load Rating 26.5kN
	End Type Sealed
	Bearing Type Drawn Cup Needle

Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height

Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies

Can support high radial loads (are pure radial bearings)

Require a considerably smaller radial design envelope than machined needle roller bearings

Usually run directly on the shaft (no inner ring)

Permit relatively high speeds

Are easy to mount

Require no additional means of axial retention (as a result of which the housing bore is easy to produce)

Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)

Result in particularly compact, cost-effective and economical bearing arrangements

Gerelateerde Links